Recommended 5th Wheel Hitch Compatible With Revolution Pin Box and 2015 Silverado 2500

Question

Question:

If we are not using the Sidewinder capabilities of the Revolution we we still need the Sidewinder Wedge Also ,Any other hitches you recommend to go with s # RP56001-53 custom rails

asked by: Joe

1

Helpful Expert Reply:

For your 2015 Silverado 2500HD, I recommend the Reese Quick-Install Custom Base Rails and Outboard Installation Kit for 5th Wheel Trailer Hitches # RP56001-53 which are 48 inches long, fit industry standard hitches, and are easier to install because of the length. If you prefer the traditional 43 inch rails, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches # RP50066-58. Both of these have custom brackets so no drilling into the frame is required. There is no adjustment required for your spray in bed liner unless it is extremely thick.

For a 5th wheel hitch, I recommend the Reese 22K # RP30033. This hitch has the dual jaw for the tight and controlled king pin contact. I recommend you also use the custom wedge for your Revolution pin box. It is the Sidewinder Wedge # SWW-03 and will make sure you get the best connection between your hitch and Revolution (Sidewinder is the aftermarket version) pin box.

expert reply by: Jason S

1

Joe

8/22/2017

If we are not using the Sidewinder capabilities of the Revolution we we still need the Sidewinder Wedge Also ,Any other hitches you recommend to go with s # RP56001-53 custom rails

Reply

Jason S.

8/22/2017

If your Revolution pin box has been locked out, you will not need a wedge. You will be able to use any 5th wheel hitch that uses the industry standard measurements for rail compatibility because the pin box will function like any other pin box when locked out. The # RP56001-53 rails are compatible with Curt, Draw-Tite, Hidden Hitch, Husky, Reese, Valley, B&W, and Demco to name a few. The Reese 22K # RP30033 is a favorite, but I also really like the B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs # BWRVK3200 because of its reputation and solid structure. The preferences in style are quite different, but each of these hitches have benefits over the others whether in structure, style, or ease of use. You can't go wrong with any of these for your application as they will all do the job well.

Reply

Answer 1

I reached out to my contact at Reese and confirmed that the Reese Revolution vhd-10K-22sw is a factory fit that is not offered in a replaceable option. Basically because of the smaller width and mounting style there is not a replacement with an…

view full answer...

Answer 2

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the Sae-a-p2-dot-14 that measures 4" L x 2" W x 1/2" H. A red lens replacement with the same dimensions is the LED Trailer Clearance or Side Marker…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...