Replacement Roof Vent for 1979 Jayco Pop-Up Tent Trailer

Question

Question:

i have a 1979 Jayco pop up tent trailer. The roof vent is 10 x 10. I need a new one. Can you get one that size?

asked by: Rob M

0

Expert Reply:

We do have many types of RV vent items you can see on the linked page including manual and fan-powered models, however, none measures 10 x 10. The vast majority of RV roof vents in use are 14 x 14-inches, like # V2092SP-28, and fit into roof openings that are generally 1/4-inch larger in each dimension, 14-1/4 x 14-1/4.

If it happens that you measured the trailer's interior trim ring, or garnish, this could have the 10 x 10 dimension you noted. I know it is more challenging to remove the old vent first but this might give you the best shot at confirming the actual roof opening size.

expert reply by: Adam R

0

Answer 1

All of our standard roof vents, such as the Ventline Ventadome #V2092SP-28, are designed to install into a 14" x 14" or 14-1/4" x 14-1/4" rough opening. This is the standard vent size for trailers and RVs so I'm not aware of…

view full answer...

Answer 2

The Ventline Roof Vent #V2092SP-28 is the standard size that requires a rough cut opening on the roof of your trailer of 14-1/4 inch by 14-1/4 inch. If you have a 13-3/4 inch square opening you'd need to open yours up a bit to get this to fit.

view full answer...

Answer 3

Most of the time you can easily just replace the gate valve and save a bit of money but if you're wanting to just swap it all out then you'll most likely need to do a bit of modification. The gate valves can be unbolted whereas the hubs are…

view full answer...

Answer 4

Yes, you will need to disconnect your 2024 Chevy Silverado 2500 battery when flat towing it. I recommend installing the Roadmaster Battery Charge Line Kit #RM-156-25 to provide a charge to your battery while traveling. This ensures you don't get…

view full answer...

Answer 5

Hi Christopher, There unfortunately isn't a guide to tell us the exact part numbers for the vents, skylights, etc. on your Passport. We offer a variety of plumbing vents and 12v fan vents but we unfortunately do not offer skylights. If you want…

view full answer...

Answer 6

Hey Jim, yeah the MaxxFan roof vent part #MA00-04002K would do a great job as a bathroom fan unlike what you have now as it can move a lot of air.

view full answer...

Answer 7

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 8

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 9

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 10

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

view full answer...