Does the Lippert Replacement Left Rear Leg for Ground Control System Include Hardware

Question

Question:

Does this item include the frame bracket and thread cutting bolts? If so for what size frame?

asked by: Joel D

0

Expert Reply:

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System, # LC305339, will include the bracket needed to mount to the frame of a trailer. The leg will replace the current leg on a Lipper Ground Control 3.0 System.

The jack leg will include a new foot pad, but hardware and snapper pin for foot pad are not included.

expert reply by: Jared P

0

Answer 1

So it sounds like it is the "passenger's" side of the trailer which would be the right side. That would mean rear leg #LC344792 is the correct replacement for you.

view full answer...

Answer 2

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 #LC305339 is the replacement leg you want. The Lippert #LC342610 is 2 inches shorter and is for travel trailers with this system versus 5th wheel…

view full answer...

Answer 3

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

view full answer...

Answer 4

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 #LC305339 has the following dimensions: 9 inch diameter foot plate 23-1/2 inches tall without foot plate 8-1/2 inches wide at widest point…

view full answer...

Answer 5

If both middle jacks are not retracting or extending on your #LC675817, odds are one or more of the fuses is out. There is a fuse for each of the legs and if one of these is bad, it will definitely cause the legs not to work. This can be mounted just…

view full answer...

Answer 6

Yes, the left rear leg for the Lippert Ground Control 3.0 Electric 4 Point Leveling System is the same as the left middle leg for the Lippert Ground Control 3.0 Electric 6 Point Leveling System. If your left middle leg measures 17" long then you…

view full answer...

Answer 7

I was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC342610 (428493)…

view full answer...

Answer 8

Lippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack. Thank you for the picture and your description. Between the Replacement #LC305339 and…

view full answer...

Answer 9

The Furrion 2-in-1 Range Oven with Glass Cover #FR97KR is actually really close to the dimensions of your 21 inch Magic Chef so this would be an easy and great replacement solution that would fit perfectly.

view full answer...

Answer 10

To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the instructions for the…

view full answer...

Answer 11

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

view full answer...

Answer 12

Yes it does, what you will need are 1/2"-20 self-tapping bolts in order to install the bracket you asked about: - Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 #LC349975

view full answer...

Does the Lippert Replacement Left Rear Leg for Ground Control System Include Hardware

Product Page this Question was Asked From

Continue Researching