Trailer Turn Signals Not Working After Installing Curt Wiring Harness in a 2013 Subaru Impreza
Question:
I have purchased the t connector for a 2013 Subaru and it is not working properly . When plugged into the trailer the lights are on and the brake lights work when brakes are pressed, but when blinker left or right or hazards are put on nothing happens. I have tested the trailer multiple times switching back from the subaru to the truck and everything works fine with the truck . Please help could it be a box error. Thanks
asked by: Jan
Expert Reply:
You can test Curt trailer wiring harness # 56061 on your 2013 Subaru Impreza to determine if the converter is faulty. The first step is to test the wires leading into the converter box from the vehicle using a circuit tester such as # PTW2993 or a meter if you have one. Have someone sit in the vehicle and go through the lighting functions while testing the input wires on the converter.
If everything works as normal on the input side, then move on to testing the output side (4-Way end). But if the input side is not correct then that indicates a problem on the vehicle side; potentially a broken or bent pin where the wiring harness plugs into the vehicle tail light connectors.
If the input side is good but the output side is not, then that indicates a problem inside the converter and the whole wiring harness will need to be replaced.
Also make sure that the wiring harness white wire is grounded to a clean bare metal surface because a weak ground could cause this and other problems. I have linked a video that will also help.
Products Referenced in This Question
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Review of CURT Custom Fit Vehicle Wiring - T-Connector Vehicle Wiring Harness 4-Pole Flat - C43FV
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
- Q&A: Troubleshooting A Turn Signal That Stays On Once The Curt T-Connector Wiring Harness Is Installed
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hook Probe Circuit Tester
- Q&A: Troubleshooting No Power On Curt 4-Way Wiring Harness
- Q&A: Can I Bypass The Converter Wiring And Wire The Trailer Lights Directly To Vehicle Tail Lights?
- Q&A: Trailer Turn Signals Not Working with Curt Trailer Wiring Harness on 2000 Toyota Sienna
- Q&A: Can the Curt T-Connector Be Used To Bypass the Factory Trailer Wiring On a 2014 GMC Terrain
- Search Results: c43fv
- Video: Curt Trailer Hitch Installation - 2020 Toyota RAV4
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Vehicle Blinkers Not Working Correctly After Installing Trailer Wiring Harness on 2017 Ford Edge
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Search Results: etbc7
- Article: Trailer Wiring Diagrams
- Video: Curt 4-Pole Flat Trailer Connector Mounting Bracket Review
- Article: My Trailer Hitch Doesn't Fit