Upgrading 2012 Nissan Pathfinder From 4-Way To 7-Way Trailer Connector

Question

Question:

since my 2012 Pathfinder already has a 4 way connector towing package I assume that means it already has the relay cable will just purchasing the 118267 replacement wiring harness be all that I need to upgrade it to a 7 way?

asked by: Richard

0

Expert Reply:

The Replacement Wiring Harness for Tow Ready Nissan Vehicle Wiring Harness # 118267 will work for your 2012 Nissan Pathfinder as it does appear you already have the relays. However if you have a gray plug with an 8 pin that has a green wire instead of a 6 pin with orange, we don't have a fit for that 8 pin. Some Nissans have that connector instead and that causes compatibility issues.

expert reply by: Jason S

0

Answer 1

The issue is likely the relay for the running lights. The relay is attached to a wiring harness which is located behind the passenger side kick panel near the passenger door (see picture). You should see a harness with 2 blue relays and a larger…

view full answer...

Answer 2

You will need the Curt Relay Kit #C57000 to complete the wiring on your 2012 Nissan Frontier. Like you guessed, since your 2012 did not have the tow package it is missing a couple connection points. Check out the video I attached that shows these…

view full answer...

Answer 3

The brown relay that you are missing powers the 12 volt accessory circuit of the 7-way. If that is not a circuit you plan to use it would not be necessary to install it. The blue relays control the turn signals which it sounds like you may have…

view full answer...

Answer 4

Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer functions…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

Yes, it does. The Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness item #RED52VR does have a manual feature that engages your trailer's brakes. You just push in the control knob and hold it down.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Upgrading 2012 Nissan Pathfinder From 4-Way To 7-Way Trailer Connector

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching