Tow Ready Custom Fit Vehicle Wiring 118267 Review Video

I'm fairly certain Nissan would offer a replacement, but I'm not aware of the OEM part number. We do offer an aftermarket replacement that would work great for you. The Tow Ready #118267 is the correct replacement 7-way trailer connector for…

The GCH #3460003 camera on third brake light frame would not be a good choice for your intended use. It is attached to a frame that matches the brake light and would not look good standing alone. The better choice is the RVS #WVOS541 wireless camera…

To install a factory style 7-way on your 2011 Nissan Pathfinder there are actually two connectors that will get used. You would need the part #118266 as it comes with the needed relays to complete the wiring. I attached a picture that shows the two…

I am sorry but at this time we do not sell the bracket separately for the HM40975-11933. We do have the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part number HM40975, available without the plug adapter wiring.

This could certainly be a grounding issue. When a circuit does not have a sufficient ground, it can cause many different issues. If possible, I recommend checking all of the grounds for your trailer taillights. You will want to make sure the ground…

The blue electric brake wire and black 12 volt power wire mix up is on the vehicle side of your 2011 Nissan Frontier. The factory tow package connector on a few of the Nissan Xterras, Frontiers and Pathfinders from 2005 to 2012 had this issue,…

We have heard of the issue you are experiencing and it is related to the black 12 volt power wire and the blue electric brake wires on the vehicle. It is not very common, but it has come up before. The problem is that the factory tow package…

The Tow-Ready part, part #20127, and the Tekonsha part, part #7894, use the same size wires. The blue and black wires are 12 gauge and the red and white are 16 gauge. They are the same part other than wire length.

Although we have not yet had the opportunity to install the #C56225 trailer wiring harness on a 2012 Pathfinder, my contact at Curt tells me that the only difference in the installation between the Pathfinder, Xterra and Frontier is the location of…

The pin on your Titan's 7-way trailer socket that should carry the 12V power feed for your trailer is the pin located at the 1-o-clock position as you view the socket. Please refer to the linked photo that I have prepared for you. If you have no…