Location Of The Grey Fuse Holder Connector On A 2000 Toyota Tundra
Question:
Curt T-connector wiring kit #C55367 for my 2000 Toyota Tundra: Cant find the fuse connector on drivers side fender wall...near the battery ?????
asked by: John Q
Expert Reply:
The small grey connector that is attached to the red fuse holder wire on the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C55367 for a 2000 Toyota Tundra is located in the vehicle's engine compartment between the battery and firewall. It should be a small grey connector with a single prong.
Don't forget to add a bit of Dielectric Grease for Electrical Connectors part # 11755 before mating the connectors. You will also want to use a 4-way mounting bracket such as the Mounting Bracket 4-Pole Flat part # 18144 if you do not already have one.
I have attached a photo of this location for you.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Roadmaster Single Park Light Diode
- Video: Trailer Wiring Harness Installation - 2001 Toyota Tundra
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Article: Testing Brake Controls
- Article: Trailer Wiring Diagrams
- Article: Procedure for Installation of an Aftermarket Trailer Brake Controller or In Lieu of Factory Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Vehicle Tow Bar Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Truck Bed Tailgate Assist
- Shop: Tailgate
- Search Results: reverse lights
- Q&A: Determining Correct Wiring Harness for 2001 Toyota Tundra
- Q&A: Installing Trailer Wiring Harness On 2000 Toyota Tundra
- Q&A: Where Does Curt Trailer Wiring Harness Install on a 2000 Toyota Tundra
- Q&A: What Is The Purple Wire Used For On The Brake Controller 7 & 4 Way Installation Kit # ETBC7
- Q&A: Running Light Circuit on Output Side of Curt Wiring Harness Has No Power on 2000 Toyota Tundra
- Q&A: Trailer Lights Not Working Using Curt 55367 on a 2000 Toyota Tundra
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Video: Curt Echo Mobile Trailer Brake Controller Installation - 2004 Toyota Tundra
- Video: Trailer Brake Controller Reverse Light Lead Installation
- Video: Review of Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55378
- Q&A: Troubleshooting Trailer Turn/Brake Signal Not Working on a 2014 Toyota Tundra
- Article: Troubleshooting Brake Controller Installations
- Video: Rackem Double Barrel Trailer Tailgate Assist Installation
on Custom Fit Vehicle Wiring
