What is the Length of the Replacement Hardware For CIPA Mirror Item # CM11002

Question

Question:

What is the length of the screw part on the CM11002?

asked by: Brian S

0

Expert Reply:

I went out to the warehouse to take some measurements of the fasteners in Replacement Hardware For CIPA Mirror Item # CM11002. The threaded part is 1-3/16 inches long. The overall length is 2-13/16 inches. I made a picture showing this for you.

expert reply by: Michael H

0

click to enlarge

Answer 1

I believe that the hook arms and locking nuts for the Longview Custom Towing Mirrors #LVT-1700 that you referenced is the Replacement Hardware for Longview Towing Mirror LVT-1700 #KLV-1710.

view full answer...

Answer 2

If your mirrors look like the ones in the picture I attached that have chrome on the back of mirror the Cipa Towing Mirrors part #CM10800 that you referenced would work great. Check out the install video I attached for more info.

view full answer...

Answer 3

The CIPA Custom Towing Mirrors #CM10800 are indeed a fit for your 2002 Chevy Silverado. These mirrors actually fit many trucks and SUVs from the GM lineup up to and including some 2007 models. I have linked a video review of this mirror set for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

What is the Length of the Replacement Hardware For CIPA Mirror Item # CM11002

Product Page this Question was Asked From

Continue Researching