Towing Mirror Recommendation for a 2006 Chevy Silverado 2500 with Chrome Mirror

Question

Question:

2006 silverado 2500hd will tow mirrors 10800 fit my mirrors have chrome on back side

asked by: John

1

Helpful Expert Reply:

If your mirrors look like the ones in the picture I attached that have chrome on the back of mirror the Cipa Towing Mirrors part # CM10800 that you referenced would work great. Check out the install video I attached for more info.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I believe that the hook arms and locking nuts for the Longview Custom Towing Mirrors #LVT-1700 that you referenced is the Replacement Hardware for Longview Towing Mirror LVT-1700 #KLV-1710.

view full answer...

Answer 2

The CIPA Custom Towing Mirrors #CM10800 are indeed a fit for your 2002 Chevy Silverado. These mirrors actually fit many trucks and SUVs from the GM lineup up to and including some 2007 models. I have linked a video review of this mirror set for you.…

view full answer...

Answer 3

I went out to the warehouse to take some measurements of the fasteners in Replacement Hardware For CIPA Mirror Item #CM11002. The threaded part is 1-3/16 inches long. The overall length is 2-13/16 inches. I made a picture showing this for you.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 11

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Towing Mirror Recommendation for a 2006 Chevy Silverado 2500 with Chrome Mirror

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching