How Much Does B&W Companion 5th Wheel Trailer Hitch for Ram Prep Package Weigh

Question

Question:

What is the weight of B&W Companion bwrvk3670? Together and separate.

asked by: Jon P

0

Expert Reply:

The B&W Companion Sliding Fifth Wheel Trailer Hitch for Ram Prep Package # BWRVK3670 weighs about 300 pounds when fully assembled.

The head, part # BWRVC3006, is about 70 pounds and the base, part # BWRVB3670, is about 230 pounds.

expert reply by: Charles S

0

Answer 1

Yes, you can take the head off of your current B and W Companion hitch and use the Ram Companion base part #BWRVB3600 to attach it to the rail kit of your 2017 Ram 2500 with the factory rail kit.

view full answer...

Answer 2

We do have the B and W Companion hitch bases for the Ram factory fifth wheel rail kits. For the slider base you'd want the part #BWRVB3670 and for the fixed hitch base you'd want the part #BWRVB3600.

view full answer...

Answer 3

The spacing for the pucks on the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ram #BWRVB3600 is 39-1/8" L x 30-1/2" W from center to center of the pucks so you could expect and overall length of…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

How Much Does B&W Companion 5th Wheel Trailer Hitch for Ram Prep Package Weigh

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching