Do All Electric Stabilizer Jacks have a Manual Override Access

Question

Question:

I have a 2017 Coleman 2855BH with electric stabilizers. I am not sure if I have the Lippert style jacks or not. I the manual override process the same with all types of electric jacks?

asked by: Butch C

0

Expert Reply:

On stabilizer jacks such as Lippert Components Power Stabilizer Trailer Jack Item # LC298707 there is usually a cap that use to be removed or the cover to the motor has to come off to access the manual crank handle connection point. So they are similar in that regard from one manufacturer to the next.

expert reply by: Michael H

0

Answer 1

It isn't likely a bearing if your PSX1 stabilizer jack #LC369774 isn't retracting or extending. There a couple of possibilities, starting with the battery. This can often be overlooked, but a battery that isn't fully charged…

view full answer...

Answer 2

I recommend checking the Switch #LC387874 on your Lippert High-Speed Power Stabilizer Jack #LC298707. You will need a Test Light #PTW2993 to ensure you are getting power going into the switch as well as power after the switch going to the jack. The…

view full answer...

Answer 3

I really sorry to hear about the trouble you're having with the rear Lippert Stabilizer Jack #LC298707 on your travel trailer. The sporadic operation you're experiencing makes me think there's either an issue with the power…

view full answer...

Answer 4

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 5

The fact that the electric stabilizers on your Forest River Super V Trailer failed at the same time leads me to believe that the issue is at the power source. It's very possible that the battery has enough juice to send power to the motors but…

view full answer...

Answer 6

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 7

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 8

The 30" Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR have a weld on design. This is the only way to install the jacks with the included mounts as there is not enough room between the stabilizer itself and the mounting plate for additional…

view full answer...

Answer 9

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack #LC298707.

view full answer...

Answer 10

Hey Chad, yes the Lippert stabilizer jack system part #LC298707 is the current replacement for the 1917771. It's actually twice as fast as what you mentioned so it will be a really solid upgrade.

view full answer...

Answer 11

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

view full answer...

Do All Electric Stabilizer Jacks have a Manual Override Access

Product Page this Question was Asked From

Continue Researching