Installation of Curt Trailer Hitch Receiver on a 2014 Ford Focus ST Hatchback

Question

Question:

Does the Curt Item # C11431 trailer hitch mount above or below the exhaust system on a 2014 Ford Focus ST Hatch?

asked by: Ryan R

0

Expert Reply:

The Curt Trailer Hitch Receiver # C11431 installs above the exhaust on the 2014 Ford Focus ST Hatchback.

I've attached a picture that shows the receiver tube above the exhaust tips. As well as the install details to show the process. The exhaust must be temporarily lowered for the install.

expert reply by: Charles S

0

click to enlarge

Answer 1

The Curt Trailer Hitch Receiver #C11431 is designed for and confirmed to fit the Hatchback ST. There will be drilling required for installation, exhaust must be temporarily lowered for installation and access holes may need to be enlarged by…

view full answer...

Answer 2

For your 2016 Ford Focus ST hatchback the trailer wiring harness I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118674. Tekonsha makes the most reliable trailer wiring harnesses in the industry, and this one has…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C11431 for your 2013 - 2018 Ford Focus ST Hatchback was designed specifically for the ST model and doesn't make contact with the bumper when in use. There hasn't been a redesign according to my tech…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C11431 which is a fit for a 2017 Ford Focus ST is designed for use the factory trailer hitch only. If you have an aftermarket exhaust then you may need to make modifications in order for the exhaust to fit.…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Installation of Curt Trailer Hitch Receiver on a 2014 Ford Focus ST Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching