Curt T-Connector Vehicle Wiring Harness Installation - 2014 Hyundai Santa Fe Video

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

For installing a 7-way on your 2022 Hyundai Santa Fe you will need to start with a 4-way. For that you would want the #CU94FR. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will…

For your adapter from the 4-way to a 7-way, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole #37185. This will give you the option of adding the 12V power, the brake controller output, and the reverse lights. Even if you don't add…

You will need a few different items to add a 7-way trailer connector to your 2014 Hyundai Santa Fe because Hyundai did not offer a factory connection for a 7-way trailer connector, only for a 4-way. If your Santa Fe was pre-wired for the factory tow…

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #CU94FR according to the manufacturer fits vehicle without the factory tow package. You can confirm you have the tow wiring harness this connects to…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

The easiest and most accurate way to determine if your 2015 Hyundai Santa Fe has the factory tow package is to simply run by your local Hyundai dealer with your VIN. With this information they will be able to tell you with certainty whether or not…

The etrailer Trailer Hitch Receiver #e45ZR has just recently been confirmed to fit your 2023 Kia Telluride. I have sent in the updates so this information will be reflected on the product page.

I do have a solution for you, however the etrailer.com Trailer Hitch Receiver #E98841 that you referenced is only designed to fit the Sport model of your 2014 Hyundai Santa Fe. For your Santa Fe Limited I instead recommend the Draw-Tite Max-Frame…

Thank you for the photos they were very helpful. What you have on your vehicle is a 4-way flat, and on your trailer you have a 7-way round, which is less common than a 7-way blade-style, but there is still an option for you to connect the two. The…

First, you'll want to make sure the included 10 amp fuse has been inserted into the red fuse holder on the wiring harness. The harness won't operate without that fuse installed. Be sure that both the connectors were firmly pushed together…