Recommended Trailer Hitch and Wiring for 2015 Dodge ProMaster 2500

Question

Question:

Good afternoon, I have a customer interested in 2ea of the 75882 hitch kit, and 1 ea to fit a 2015 model van just like it, I need to know if it comes with a wiring harness and if it happens to be the heavy dutiest available version. My customer in question is our local school district so we need to make sure that i get them the best available quality, thanks!!!

asked by: MATT B

0

Expert Reply:

The Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75882 referenced in your question is confirmed to fit the 2015 Dodge ProMaster 2500, as long as it is not the EXT model. This Draw-Tite Hitch does provide the highest tongue weight capacity of 750 pounds and towing capacity of 6,000 pounds available for trailer hitches confirmed to fit this vehicle. I have attached an installation video on a 2014 ProMaster 2500 for you to check out.

This trailer hitch does not include a wiring harness. If the van does not have the factory tow package, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118618. This will install a 4-way trailer connector on the ProMaster by plugging directly into existing wiring behind the trim panels in the cargo area on the driver and passenger sides. I have included the installation details for your review.

For a ball mount, I recommend the etrailer.com Ball Mount Kit # 989900. This kit includes two ball mounts, one with a 3/4 inch rise or 2 inch drop and and another with a 2-3/4 inch rise or 4 inch drop. It also includes both a 1-7/8 inch and 2 inch hitch ball. I have included an article that will help you determine the correct ball mount for your setup if the included ball mounts in the kit are not sufficient to tow the trailer level.

expert reply by: Chris R

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver #75882 is a class IV hitch. I was able to verify this with the manufacturer.

view full answer...

Answer 2

Curt 2-inch hitch #C13207 will give you both the highest available hitch tow rating of 7500-lbs and a simple no-drill installation on your ProMaster 3500. This hitch should take only about half as long to install as the Draw-Tite #75882, about a half…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...