Which Firestone Ride Rite Kit Fits a 2017 Ford F-350 with Lift Kit

Question

Question:

will f2600 air bags fit a 2017 f350 with a 6 inch lift I think it is a 4 inch lift with 2 inch taller tires

asked by: Kevin

0

Expert Reply:

The Firestone air bag kit part # F2600 is a fit for 2017 Ford F-350s but to determine what you'd need beyond that to get it to fit since you have a lift first requires you to determine exactly how much lift you have.

If you have a 4 inch lift you'd need the part # F2371 or if you have a 6 inch lift you'd need the part # F2375.

expert reply by: Jameson C

0

Answer 1

The issue you are having is because you have the factory fifth wheel rail kit in your 2017 Ford F-350. Firestone does not list the #F2600 as a fit for the versions of the 2017 F-350 that have in-bed hitches like yours. For a kit that does fit your…

view full answer...

Answer 2

The best suspension enhancement solution we have for your 2020 Ford F-250 which will give you the support you want and not sacrifice ride quality is the part #RAS3611-SHD. This can provide up to 3,000 lbs of additional suspension support (does not…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Which Firestone Ride Rite Kit Fits a 2017 Ford F-350 with Lift Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching