How to Install the Fulton Single Axle Trailer Fender on a Tow Dolly

Question

Question:

Will this fender a tire with a 14 inch rim? Do I need A bracket to attach the fender to the tow dolly? Thank you

asked by: Serafin

0

Expert Reply:

The Fulton Single Axle Trailer Fender with Top Step # F008554 is designed to fit tire on a 14 inch wheel. The dimensions are: 9.7" wide x 31.3" long x 12.75" tall. The top step is 8 inches wide and it has a capacity of 300 lbs.

You can attach it to your tow dolly using brackets, like part # PF775-BKT-2, or you can simply bolt it straight onto your tow dolly if you have the space to do so. I have attached a picture that a customer sent in where they installed it using the second option.

If you would rather have the part in Silver instead of Black you will want part # F008564.

expert reply by: Jon G

0

click to enlarge

Answer 1

Your trailer appears to have steel fenders and we do offer these as well as tough ABS plastic types and aluminum fenders too. You can see all replacement trailer fenders on the linked page. Just click on your trailer's wheel diameter and…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 7

There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.

view full answer...

How to Install the Fulton Single Axle Trailer Fender on a Tow Dolly

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching