Does Draw Tite Front Hitch 65052 Fit 2010 Yukon XL Denali

Question

Question:

Will this fit the 2010 Yukon XL Denali? The Draw-Tite website says it fits the Yukon XL, but doesnt offer that confirmation for the Denali version. Ive seen the Curt option, but would rather not drill into the frame. Reese also has an option, but I cant confirm that will work either. Thanks!

asked by: Brett

1

Helpful Expert Reply:

I confirmed with Draw Tite that the front hitch part # 65052 is a confirmed fit for your 2010 GMC Yukon XL Denali so it will work well for you.

expert reply by: Jameson C

1

Answer 1

Although both the Curt #C77NR and #C37BR both look to be identical there is a small difference in the #C77NR that allows it to be compatible with 2022 and 2023 Kia Niro models, whereas the #C37BR is only compatible with 2022 models.

view full answer...

Answer 2

The Curt Front Mount Trailer Hitch Receiver #31322 and Draw-Tite Front Mount Trailer Hitch Receiver #65052 are the 2 options available for a front mounted receiver on your 2010 Chevrolet Silverado 1500. Both of these receivers will sit below the…

view full answer...

Answer 3

Both the Curt Front Hitch part #31322 and the Draw Tite part #65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location. Biggest difference is they are made…

view full answer...

Answer 4

I reached out to a representative of Draw-Tite who explained that the front mount trailer hitch #65052 that fits your 2014 Chevy Suburban LTZ will require trimming "up to the bottom of the bumper fascia" and sent the accompanying photo…

view full answer...

Answer 5

As long as your 2012 Chevy Silverado 2WD is a 1500 model the Draw Tite front hitch part #65052 that you referenced will fit and work well. If instead you have a 2500/3500 model you'd want the part #65078.

view full answer...

Answer 6

The Kuat Piston Pro X Bike Rack #KU98VR actually does have the ability to add that 2-Bike add-on making it a 4-Bike carrier. The Piston Pro X is a brand new rack so when I reached out to my contact at Kuat they said this rack does have the ability…

view full answer...

Answer 7

The Draw Tite hitch part #65052 is a confirmed fit for your 2007 Chevy Tahoe and will bolt right up to the frame without any modification. It does drop down 7-3/4 inches from the frame where it attaches as well like you mentioned.

view full answer...

Answer 8

Both the Draw Tite front hitch part #65052 and the Curt front hitch part #C31012 are a fit for your 2007 Chevy Suburban. Since the Draw Tite does not require drilling to install it would be the hitch I would go with. Both will require either trimming…

view full answer...

Answer 9

We carry a front hitch for your 2010 Chevy Silverado 1500 for that you would want, part #65052. This hitch has a line pull capacity of 9,000 lbs and a tongue weight capacity of 500 lbs so as long as you stay under that you will be just fine.

view full answer...

Answer 10

The Draw-Tite Front Mount Trailer Hitch Receiver #65052 is not a confirmed fit for your 2010 Chevy Suburban Z71. The Z71 is excluded from their fit, so I recommend the Curt #C31012 instead. It will required drilling and some trimming of the front air…

view full answer...

Answer 11

Yes, the front-mount trailer hitch receiver you referenced, Draw-Tite #65052, is a confirmed fit for your 2013 Chevrolet Silverado 1500. We do in fact offer another comparably-rated front hitch for your truck, the Curt #31322. Both hitches install…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does Draw Tite Front Hitch 65052 Fit 2010 Yukon XL Denali

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching