What Is The Difference Between The Trailer Valet Trailer Dolly Models?

Question

Question:

Is the only difference between the 2 models the ball size ?

asked by: Bob S

0

Expert Reply:

Yes. The only difference between the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW # TVXL25 and the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW # TVXL2 is the hitch ball size. Either model can accept the other hitch ball size, but they are sold separately.

You can get the other hitch ball size to go with whichever model you choose. You can use the 2" Hitch Ball w/ Base for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVBB2 or 2-5/16" Hitch Ball w/ Base for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVBB25 if you don't want to remove the base for a faster swap without a wrench needed or you can just replace the ball as the bases are the same for both sizes. For just the hitch ball, you can use the Replacement 2-5/16" Hitch Ball for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVHB25 or the Replacement 2" Hitch Ball for Trailer Valet XL Trailer Dolly - 1,000 lbs # TVHB2.

expert reply by: Jason S

0

Answer 1

That is a great question. As you mentioned, the Trailer Valet XL Trailer Dolly with Chain Drive #TVXL25 has a gross trailer weight capacity of 10,000 pounds and a tongue weight capacity of 1,000 pounds. I reached out to my contact at Trailer Valet…

view full answer...

Answer 2

I've attached the photos of the instructions that come with the Trailer Valet XL Mounting Bracket #TVXLMB. It's a 2 page document, but hopefully it gives you a good idea of how it mounts and works with a Trailer Valet #TVXL2 or…

view full answer...

Answer 3

Normally the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR install on outsides of trailer frame. I attached an install video for this for you to check out as well.

view full answer...

Answer 4

We do have a snap in plug for Lionshead trailer wheel center caps. The Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome #LHSI60C will fit the following three models. #LHCS102, #LHCS108, #LHCS109. If you have one of these models then…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Is The Difference Between The Trailer Valet Trailer Dolly Models?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching