Curt Trailer Wiring Harnesses that Fit 2004 Dodge Dakota

Question

Question:

Will this harness fit a 2004 Dodge Dakota quad cab?

asked by: George R

0

Expert Reply:

If your 2004 Dodge Dakota has a factory 7-way the trailer wiring harness part # C55381 would fit and work well to provide you with a 4-way.

If instead you did not have a 7-way you would want the part # 55323 which plugs inline with the taillight harnesses of your truck.

expert reply by: Jameson C

0

Answer 1

Curt trailer wiring harness #C55381 will only fit your 2007 Dodge Durango if it came with the factory tow package. If you cannot find that factory connector anywhere then it is likely that your model does not have the factory tow package and you will…

view full answer...

Answer 2

view full answer...

Answer 3

Good news! You are on the right track to equip your 2004 Dodge Dakota Quad Cab with wiring to tow. Since your Dakota doesn't have the tow package then yes, you will need the 4-way wiring #55323 first, this will simply plug and play with your…

view full answer...

Answer 4

Sometimes Curt's online fitguides can be confusing. I did just check their most recent fit chart and the #55323 is listed as a confirmed fit for your 2004 Dodge Dakota so it will fit and work well.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Curt Trailer Wiring Harnesses that Fit 2004 Dodge Dakota

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching