Availability of High Capacity Trailer Hitch for 2016 Ram 1500

Question

Question:

Have a 2016 dodge ram 1500. Need a hitch that can tow 10800 lbs....Would this hitch be easy to install? thank you

asked by: John F

0

Expert Reply:

We have the Draw Tite hitch part # 41948 which is a confirmed fit for your 2016 Ram 1500 and has a capacity of 15,000 lbs but I would be surprised if your truck has this capacity or even the 10.8k capacity you are looking for.

Everything I am able to look up says that your truck only could have a max towing capacity of 8,370 lbs.

expert reply by: Jameson C

0

Answer 1

I recommend the Draw-Tite 2-inch hitch #41948 for your 2016 Ram Tradesman 1500 that does not have a factory hitch. This hitch is rated for 1500-lbs of tongue weight and a maximum of 12K towing weight and it offers no-drill installation as shown in…

view full answer...

Answer 2

The best Class V trailer hitch for your 2019 Ram 1500 Classic is the Curt Trailer Hitch #C15572 because it has the highest towing and tongue weight capacities and is a no-drill installation, not to mention the fact that it is made in the USA. This…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 10

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 11

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 12

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...