Can I Get the Individual Parts Separately for the Convert-A-Ball Set # 906B

Question

Question:

Do you sell the clamp on 2 5/16 ball adapter by itself?

asked by: Jerald W

0

Expert Reply:

The individual components of the Convert-A-Ball Interchangeable Set # 906B are:

Convert-A-Ball 1 inch Shank - # 106B
Convert-A-Ball 2 inch Hitch Ball - # 401B
Convert-A-Ball 2-5/16 inch Hitch Ball - # 601B

expert reply by: Jon G

0

Answer 1

For 1 inch diameter shanks like the Convert a Ball Ball #906B you need to use 120 ft lbs of torque.

view full answer...

Answer 2

On the Convert-A-Ball Interchangeable Ball Set, part #906B, there is very little play between the ball and the shank after the two pieces are assembled. I am including a video that will give you a better idea of how much play there will be. The…

view full answer...

Answer 3

Thank you for the photo of your Coleman trailer's Bargman 92-series tail light. We do offer a replacement Bargman 92-series light assembly, part #30-92-001, which uses the same 1157 bulb as your original. For a bulb only use part #DI79VR. I…

view full answer...

Answer 4

The Draw-Tite trailer hitch, #24843, uses lock washers and conical tooth washers that prevent the nuts from backing out. I would say that the use of grease is not prohibited by the instructions (see link) but that there are some other options. You…

view full answer...

Answer 5

Using anti-seize compound on the hitch mounting bolts is not necessary. Because of the lubricant properties, you'd need to lower the torque specs in order to not over tighten the bolts. You would be better off installing the bolts dry and…

view full answer...

Answer 6

The Gen-Y Adjustable 2-Ball Mount #325-GH-624 referenced in your question features a 2-1/2 inch shank along with 4 stacked receivers that each have a 2-1/2 inch opening. This heavy-duty adjustable ball mount has a 16,000 pound towing weight capacity…

view full answer...

Answer 7

We do carry the Lippert Electric Trailer Brake Assemblies Left #LC96WD and Right #LC46WD from Lippert for their 4,400lb axles. These brakes are self-adjusting like the Electric Trailer Brake Kit #AKEBRK-35-SA.

view full answer...

Answer 8

There is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item #906B, would give you…

view full answer...

Answer 9

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 10

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR that you referenced has two hitch pin holes that are one inch apart so the first pin hole has a distance of 10 inches from the ball center to the hitch pin and the other is 11 inches.

view full answer...

Answer 11

We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model #100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005, which is a direct replacement for the regulator on your…

view full answer...

Answer 12

I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…

view full answer...

Can I Get the Individual Parts Separately for the Convert-A-Ball Set # 906B

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching