Gooseneck Wiring Harness Options for 2016 Ford F-350 Super Duty

Question

Question:

Hi there im looking for an in bed 7 prong goose neck connector for my 2016 super duty FORD BC3Z-13A576-A do you have a pullock version that uses the same rectuangle connections that this one does? I do not like the style that is the big circle connections that plug in behind the bumper mount

asked by: Jeffrey

0

Expert Reply:

All the wiring harnesses we offer for your 2016 Ford F-350 Super Duty are shown on the linked page. These include 4-pole and 7-way kits. All use a round U.S. Car type connector such as that found on parts # C56070 (7-foot harness) and # C56000 (10-foot harness).

expert reply by: Adam R

0

Answer 1

Yes, I checked with Curt and their 5th Wheel and Gooseneck Wiring Harness #C56000 is a confirmed fit for your 2011 Ford F250.

view full answer...

Answer 2

The issue you are describing may be related to the factory brake controller in your 2012 Ford F-350 and its compatibility with the electric over hydraulic actuator you have on the trailer. For example, the Titan BrakeRite I Plug and Play…

view full answer...

Answer 3

If you have a 7-way trailer connector the pin in the 1:00 position carries the 12 volt accessory circuit which is what normally charges a trailer battery. It would need to be ran to the positive post of your battery though. You should note that this…

view full answer...

Answer 4

The out put on the trailer brake pin on the 7-Way is dependent upon how the brake controller is set. The power level of a brake controller can be set aggressively or lower depending on how heavy the load is you are carrying. The controller in the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...