Recommended Roof Rack For 2010 Coleman-Fleetwood Niagara Popup Camper

Question

Question:

I have a 2010 Coleman-Fleetwood Niagara Popup Camper and I want to add roof bars across the camper roof. The dimensions are: Across the top is 15/16, the slot in the top is 7/16inch wide, the horizontal slot is 5/32inch high and 7/8inch at the top and 1inch at the bottom of the slot. I need 4 mounts that can be attached to this rail. I can make mods if necessary to make things fit. The cross bars need to be 7foot long. Please help me find something g that will work.

asked by: Greg M

0

Expert Reply:

We don't have a confirmed fit for your tracks, but we do have options for you. I recommend the Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells - Steel - 7' Long - 150 lbs # S80510 or the SportRack Pop-Up Camper Roof Rack - Square Crossbars - Steel # SR1020. Either option will give you the distance and support you need for a roof rack on your Coleman-Fleetwood Niagara Popup Camper.

expert reply by: Jason S

0

Answer 1

We do not have access to the specs of the axles of individual trailers, so the best way to determine what brakes you need to use as replacements is by verifying the capacity of the axle. It's most likely that you've got a 3500-lbs axle since…

view full answer...

Answer 2

Coleman/Fleetwood uses Dexter axles so I can help you pick out the parts you need for your 2,200 lb Dexter axle. The bearings you would need are #L44649 for the inner and outer and then for a seal #10-9. For brake assemblies you would need part…

view full answer...

Answer 3

From previous customers with your 2003 Coleman Fleetwood we've been able to determine that your trailer has 2,200 lb Dexter axles. The bearings you would need are #L44649 for the inner and outer and then for a seal #10-9. For brake assemblies you…

view full answer...

Answer 4

The roof rack I recommend for your Rockwood Freedom 1940LTD Pop-Up Camper is the Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells #S80510 because of its strength and durability. This rack, which has been used by our customers on a…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 9

Are there any visible signs of wear on the magnets like exposed windings then that would indicate they need replacing. Magnets can go bad without showing visible signs of wear though. To see how to troubleshoot them check out the help article I…

view full answer...

Answer 10

The 185/80-13 trailer tire size and the 175/80-13 both fit the exact same rim sizes so yes you could go down to the 175 size like the part #TTWTRTM1758013C which is a radial with a higher speed rating of 81 mph.

view full answer...