Stand Up Bike Stand that Will Fit Fat Bikes and Cruisers

Question

Question:

Looking for vertical bike stand accommodating cruisers and fat bikes

asked by: Rob

0

Expert Reply:

The Steadyrack # B-SRFT-001 fits tires up to 5 inches wide and bikes up to 77 pounds so it'll have no problems with your heavier cruisers or your fat bikes. It also folds to make them more compact

expert reply by: Charles S

0

Answer 1

The Steadyrack Bike Storage Rack #B-SRFT-001 has a weight capacity of 77 lbs and can fit fat tires up to 5 inches in width. As long as the fender doesn't run all the way down the back of the front tire it would not be an issue.

view full answer...

Answer 2

The Steadyrack, part #B-SRFT-001, fits up to 5 inch tires so it will work great on your fat bikes.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 12

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...