Aluminum Sendel Series S20 Machined Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2

Video Transcript for Review of Sendel Trailer Tires and Wheels - Wheel Only - SEN94FR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Sendel 16 inch by 6 inch aluminum series S20 silver machine trailer wheel with the 6 on 5-1/2 inch bolt pattern. Now, this aluminum wheel is very durable, lightweight, and rust-proof. As we mentioned, this one is the Sendel Series S20 which is a modular design wheel. And when we say modular design, that's one that has the round holes all the way around the design. Does use a machine face and lip and it has silver accents in the holes.

Now, the front and the back of the wheel are all clear coated and this is a high-quality wheel that'll meet the DOT, Department of Transportation specifications and the SAE standards. If you notice, this wheel does not come with a center cap. If you do want the center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that'll have the same diameter of this pilot hole 'cause when you install it, it'll go through this pilot hole. The diameter on this opening is 4.25 inches.

Now, just to give you some measurements on the wheel itself, we said this was a 16 inch diameter. So when you measure the diameter of the wheel, it's always measured inside the inside. So if we take our ruler, we go inside to inside, there's your 16 inch diameter. A width will be the same way. Tire bead seat to tire bead seat, so inside to inside, six inches.

Bolt pattern on this wheel is a 6 on 5-1/2 inch bolt pattern. And if you we're to measure that on a wheel like this, that's an even number of lugs, it's pretty easy 'cause if you notice, the lug holes are directly across from each other. So you just pick any hole, let's say this one, and then you'll measure from the center of this hole directly across to the center of the one right across from it. So on this, it'll measure 5-1/2 inches. So it's a 6-lug 5-1/2 bolt pattern.

This will use a wheel lug size of 1/2 inch by 20 or 9/16 by 18. And the weight capacity on this wheel is 3,300 pounds. But that should do it for the review on this Sendel 16 inch by 6 inch aluminum series S20 silver machine trailer wheel with the 6 on 5/12 inch bolt pattern.