Can Equalizer Weight Distribution System be Used with Curt Weight Distribution Shank
Question:
I have a 2015 Ram 2500 4x4 crew cab. I am looking to purchase the equalizer 14k 4point hitch. I want to be sure I have enough for the hitch to get the proper height. My truck has a 2 1/2inch receiver and I currently use the reducer for my reese pro series round bar hitch. My current hitch is setup 3/4 in higher than the coupler as per reese instructions. I suppose I could find the p/n or measure how much I achieve with my current shank and get a shank that has slightly more drop to bring ball down to proper level? I just dont want to buy the equalizer with the shank then have to buy another. So i thought I would buy the equalizer without the shank and also buy a shank with more than my current one. Would this curt shank fit the equalizer hitch head properly with no sloppiness? Also i assume this setup would be okay to use with the 2 1/2-2inch reducer that I currently use that came with the truck. Thanks for your time.
asked by: Nathan L
Helpful Expert Reply:
The Curt weight distribution shank part # C17123 that you referenced is confirmed to fit with Equalizer weight distribution systems. It will work with the 14k Equalizer part # EQ37141ET you are interested in which can be used with a hitch reducer.
Products Referenced in This Question
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Demco Spare Tire Mount for Bolt-On Swivel Jack - Silver
- Search Results: spare tire mount
- Search Results: demco coupler
- Video: Review of Demco Spare Tire Carrier - Trailer Tongue Mount - DM15853-52
- Shop: Blue Ox Pole Tongue Weight Distributing Hitch Adapter
- Shop: Aluminum HWT 07 Series 5 Spoke Trailer Wheel - 15" x 5" - 5 on 4-1/2
- Shop: Replacement Base for B&W Companion 5th Wheel Trailer Hitch - 20,000 lbs
- Search Results: equalizer weight distribution hitch
- Search Results: pole tongue adapter
- Search Results: equalizer 1400
- Shop: Trailer Hitch
- Shop: Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
- Search Results: k23~473~00
- Search Results: fortress coupler lock
- Q&A: Recommended Equal-I-zer Weight Distribution Hitch for Ice Castle Fish House Trailer
- Q&A: What Size Wheel Has Weight Capacity of 3,000-Lbs or More For 6K Axle with 6 on 5-1/2 Bolt Pattern
- Shop: Suspension Enhancement
- Q&A: Bolt Hole Spacing of Curt C13900 Multi Fit Class III Hitch
- Video: Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review
- Shop: Trailer Wiring
- Q&A: Does Curt TruTrack 1,500 lb Weight Distribution Fit Gen-Y Torsion Weight Distribution Shank
- Q&A: Gen-Y Weight Distribution Shanks for Blue Ox Weight Distribution Systems
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Q&A: Weight Distribution System Compatible With Lifted Truck
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires