Prodigy Brake Controller Installation in 2015 Infiniti QX60
Question:
Need a harness for the brake controller. I found the harness connector that connects under the dash. Also recommendation for a controller? If you dont have one would you suggest where I could get one?
asked by: Ronald D
Expert Reply:
Since there can be many connectors under a vehicle dash, I suggest you test the connector you've found to confirm it is indeed for a brake controller. A brake controller port will have four wires/contacts and one of these will carry 12V at all times, and another will carry a signal ONLY when you press the brake pedal. The other two pins should not carry any signal at all. You'll need a tester like # PTW2993 to test the pins. If this is indeed a brake controller connection port then you can use harness # 3050-P, as you noted. My contact at Tekonsha advised that the port is usually taped up near the steering column.
If you find that this connector ends up being for a different function, then you can install a superb controller like the proportional-type Prodigy P2 # 90885 using the # ETBC7 kit. The car will also need to have a 4-pole harness in place; if you do not already have 4-pole wiring you can use part # 118670.
Once you have a working 4-pole in place the # ETBC7 will provide all of the other parts needed for installing the controller.
Two help articles on controllers and the ETBC7 installation are linked for you along with an installation video.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Q&A: Ground Clearance When Installing Draw Tite Hitch on 2016 Nissan Pathfinder
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Trailer Wiring
- Shop: Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2019 Infiniti QX60
- Shop: Brake Controller
- Video: Draw-Tite QSP Trailer Hitch Silencer and Cover Review
- Q&A: Installing Brake Controller on 2014 Infiniti QX60
- Search Results: allen bike rack
- Search Results: bike rack
- Search Results: receiver cover
- Shop: Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
- Shop: Draw-Tite Logo Rubber Hitch Cover for 2" Trailer Hitches
- Q&A: How to Determine Correct Ball Mount Rise or Drop for Towing a Trailer with a 17 Inch Coupler Height
- Video: Swagman Bike Locks - Cable Lock - S64031 Review
- Video: Curt Ball Mounts - Fixed Ball Mount - D-28 Review
- Video: Curt Ball Mount for 2 inch Hitches Review D-28
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Search Results: ball mount
- Search Results: curt hitch lock
- Search Results: curt 45155
- Search Results: 2753
- Video: etrailer Class III Trailer Hitch Installation - 2017 Nissan Titan
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Shop: Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
- Shop: Fulton Marine Grade 2" Hitch Lock - Stainless Steel - 5/8" Diameter - 2-7/8" Span
- Q&A: Manual for Hopkins Reliance Trailer Brake Controller
- Q&A: Wiring Tekonsha Brake Controller into 2014 Infiniti QX60
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)