Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
(1008 reviews)
Price: $16.69
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
Item # 3050-P
Our Price: $16.69
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1008)
- Q & A (0)
- Photos
2017 Nissan Titan - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your 's dashboard.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
305000 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces 3050-P
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti - 3050-P
Average Customer Rating: 4.9 out of 5 stars (1008 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.by: Bill G.06/04/2017
2008 Nissan Titan
I purchased the 3050-P quick connect wire harness for the ease of installation.
My 2008 Nissan Titan has the big tow package and I needed an electric brake system.
All I had to do was remove two phillips head screws and the lower dash panel pulls off. Locate the factory brake harness which is taped up at the emergency brake and attach the two together. I routed the harness to the right side of the lower dash because I'm right handed but, there is enough wire to move it to other areas within reason.
I also purchased the pod Pro Series 80500 which serves 1 or 2 axel brake systems. I mounted it to my lower dash on the right side within reach and it plugs right into the wire harness.
I have not had chance to use the new system yet but, am confident that etrailer has sold me a system that will work for me.
by: Andrew 02/12/2024
Infiniti
Tekonsha Prodigy P2 Trailer Brake Controller And wiring harness purchased to pull 20’ enclosed trailer on my Infiniti QX 80. Installation was easy and correct the first time. Controller works great. Thank you etrailer
by: Alex08/07/2019
Excellent quality of materials, fit perfectly fine on our 2018 Infiniti QX-60. Just make sure to take the cap off from the break connector in order to fit the plug and play wire harness. Cap is attached.
Thanks,
Alex S.
8/8/2020
The product has been working flawless.
by: Bob Z.12/11/2015
2015 Nissan Xterra
It was easy to use this short wiring harness to connect a Tekonsha Prodigy P3 brake controller to the factory installed under-dash connector on our new 2015 Xterra. ALL 2015 Xterras have that under-dash connector, regardless of trim level or model. Previous years may also, just look for the white 6-conductor connector that is taped to a wire bundle under the dash above the right side of the driver footwell (see my photo). The cable was just the right length to make the connection to the brake controller mounted to the plastic panel just up from the hood release tab (see the other photo). Because the brackets supplied with the controller would have placed the controller about an inch from the dash surface, creating a knee-banger situation, I instead use some industrial quality 3M dual-lock fastener (like velcro on steroids) to mount the controller. The controller is securely mounted right up against the dash panel, but is still is removable, if needed.
If you also need a rear 7-way connector harness and the relays that all plug into the factory installed connectors, I highly recommend #118266. It provides everything you will need except for the bracket to mount the 7-way connector to the bottom lip of the rear bumper, see #TM76474.
by: Michael 02/07/2024
2015 Nissan Titan
I received the Prodigy 3 brake controller very quick. It was a plug and play. Installation was completed in less than 30 minutes. Etrailer are the best.
by: Walter03/04/2022
Janet was very helpful in answering my questions and helping me select the correct trailer brake controler for my 2007 Nissan Frontier. Didn't need to cut and crimp wires, it was all plug and play. I needed it ASAP and got it in two days. It's good to have customer service in the U.S. and not have to struggle with foreign accents. Thanks etrailer!
Walter
3/6/2023
The controller and cable are still working well, no problems.
by: Ronald 04/15/2024
Fast delivery and the product was as easy to install as shown in the installation videos on your website.
by: Joshua B10/26/2019
I am still very much satisfied with my Tekonsha brake system and harness. It has continued to work flawlessly and has prevented an accident on more than one occasion. I’m glad I spent the little bit extra considering the ease of installation and continued reliability!
by: Don 01/09/2023
Product was correct,fit,on time and simple to install. All the above are very uncommon these days. First time I have used etrailer won't be the last.Thanks.
Don
1/11/2024
Still works great.
by: Brian 12/29/2023
2017 Nissan Frontier
I purchased this along with the brake controller for my 2017 Nissan Frontier. Very easy to install and has been working flawless for me.
by: Chris H.01/28/2017
2017 Nissan Armada
I had a little difficulty making sure that this was the correct adapter for my 2017 Nissan Armada, but it is. They are the same connector as 2015.
I also had trouble locating the factory pre-wiring and tgere was nothing in my Nissan owners manual that I could find. If you have a 2017 Armada the pre-wiring is on the right side of the steering column, above the accelerator (see pic). From what I understand, on the previous generation vehicles, the pre-wiring was on the left side near the e-brake.
As far as the product itself, it works, fit properly, and the wiring is solid.
by: Andrew 11/15/2021
2006 Nissan Titan
Simple plug and play with my 2006 Nissan Titan, and etrailer staff was extremely helpful
Andrew
11/16/2022
Still works like new! I tow a car hauler very often, and this controller and harness has held up as expected.
Andrew
11/28/2023
Still working good :
by: Pete D05/22/2021
2019 Nissan Frontier
Seems it was tailor-made for our Frontier. The ease of installation is only surpassed by a leading name in brake controllers.
by: Joe 03/22/2024
2014 Nissan Frontier
Received item before expected date. Fit perfectly in my 2014 Nissan Frontier.
by: John M.10/18/2018
2017 Nissan Titan
I ordered this with the # 90195 Tekonsha P3 Trailer Brake Controller. This adaptor is perfect, no cutting into wires or using wire taps, just plug and play, that's the way I like doing things looks more like factory install. worked out great for me on my Nissan 2017 Titan. way to go
by: Jim R.09/14/2013
2011 Nissan Frontier
The brake control harness I purchased from etrailer was exactly what I need and was very easy to install; especially with their product video showing step-by-step installation process. The harness works great with my Tekonsha Primus IQ brake control for my 2011 Nissan Frontier. Great product, great process and delivery came in less than a week.
by: Dave R05/14/2013
2013 Nissan Frontier
Installed in 2013 Frontier Kingcab with 7-wire Nissan factory harness. With the Tekonsha wiring adapter it simply plugged-in, cable-tied to the under-dash wiring and was done. Rather than drill the dash for the mount, the mounting bracket was velcro'ed (adhesive backed) to the flat area between the seats (slightly under the dash). See attached picture. Appears to be functioning well with no issues.
by: Emmanuel 08/15/2023
2023 Nissan Frontier
Delivery dates were changed a few times. I ordered item # 3050-P, However, item I received was marked 3050. It worked ok. Only problem was trying to locate area where to plug in wiring adapter underneath Frontier dash board.
by: Bill W.04/21/2014
2014 Nissan Frontier
Worked perfectly on my 2014 Nissan Frontier. Wanted to place my Tekonsha Prodigy P3 in the center console area and not have to drill a very large hole for the harness to feed thru. Merely removed the 4 wires from the end of one connector, fed thru, and reassembled.
by: Kirk08/11/2020
This one worked great. I had previously bought one from another online retailer (exact same part) and for some reason it would not hold the connection with the electric brake controller. It would lose power, basically turn off when on the road. A call to Tekonsha was no help what so ever!
by: Great service, perfect product09/17/2017
2017 Chevrolet Silverado 3500
I traded in my Ford E350 for a new 2017 Nissan 3500 NV and realized that I no longer had a break controller for my van. The dealer didn't have any in stock and didn't offer installs so after a brief search on etrailers I found the right product, which even included the easy to use cable harness connector and I was able to install my new break controller in about 30 mins!
by: Gregory07/16/2020
I have a 2016 Nissan Frontier with the factory towing package. Etrailer.com could not confirm that the wiring adapter works with my vehicle.
The sales rep I spoke to at etrailer.com was super patient and accommodating. I bought the product not 100% sure if it would fit.
It fits! Super easy install. Plugged one end into the harness under the dash and the other end into the Tekonsha brake controller. Under 1 minute install!
Thank you etrailer for a great buying experience!
Gregory
8/8/2021
A year later and still as happy as the first day I bought the product!
by: Gerry 10/04/2020
Perfect fit.
No hassles with install.
Best part was Etrailer rep. knew exactly which part I needed on phone and sent me to website reference for further proof of correct part.
Nissan prewired the truck to receive the controller which wiring comes with a simple plug in connection.
All you do is order matching plug from Etrailer which comes with the four color coded leads that match the techonsia controller.
Attach the leads, plug it in, Mount the controller and you’re done!
Excellent service and product.
Gerry
10/5/2021
It’s been a year and as a follow up to previous review I would just add that the unit is working great. This is a testament to the Prodigy unit. When I hooked up a different trailer than my utility trailer which I had been using the controller indicator showed no connection, though it was physically connected. This told me there was a fault in the trailer wiring as it was still indicating good connection with utility trailer. After checking for poor ground on trailer with fault I then inspected the wires to brakes snd found one chewed right into by a squirrel. Reattached and controller indicated a good connection and I was good to go. This would have been a bigger problem with a controller that did not give connection and other feedback info. Also this controller is 5 years old on second vehicle.
by: Maurice 04/28/2024
As always, another Smooth & Fast Transaction…. Never had a problem with Etrailet!
25
1008
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Brake Controller and 7-Way for a 2015 Nissan Frontier SLI recommend the Tekonsha T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266 for your 7-way connection on your 2015 Nissan Frontier. This will give you a plug and play connection along with the correct relays to allow you to use a brake controller and 7-way on your Frontier. As this is actually replacing your 4-way connection you will need to use a 7 Pole to 4 Way Connector Adapter # PK12716 if you need to also tow trailers with a 4-way flat connector. The Tekonsha Prodigy...
view full answer... - 7-Way and Brake Controller For 2005 Nissan Frontier without Towing PackageFor your 2005 Nissan Frontier that does not have the towing package we have an OEM style 7-way setup that comes with everything needed for a fully functional 7-way with the kit part # 118266. I attached an install video that shows how this kit installs in a similar 2008 Nissan Frontier as well. Then to install a brake controller like our really popular and well performing Brake EVN # TK63VR we have the install harness part # 3050-P which plugs into the back of the controller and then into...
view full answer...
- Hitch, Wiring and Brake Controller Adapter For 2019 Nissan Frontier To Tow Trailer with BrakesThe Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part # 75282 is a great option for your 2019 Nissan Frontier. It is rated for up to 750 lbs of tongue weight and is a nice concealed cross tube design so the only part of the hitch that is visible underneath the Frontier is the receiver portion. I have attached an installation video for your reference. The wiring that you need to power the brakes on your trailer is Curt T-Connector Vehicle Wiring Harness for Factory Tow Package...
view full answer...
- Turn Signals on 2009 Nissan Frontier Do Not Work When Trailer is ConnectedTypically a 4-pole flat trailer connector on a vehicle carries only lighting functions (stop light, running light and turn signals). Electric trailer brake signals from an in-cab brake controller require an additional circuit (and an additional wire) to send those signals to the trailer brakes. Usually a 5-, 6- or 7-way connector is employed to include this function. Please refer to the linked article on trailer wiring; this shows the various vehicle-side and trailer-side connectors and...
view full answer...
- Brake Controller and Install Harness Recommendation for a 2015 Nissan FrontierAll you need to install a brake controller in your 2015 Nissan Frontier is the correct install harness. The correct install harness for all of the Tekonsha controllers is the part # 3050-P. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies...
view full answer... - 7-Way Trailer Connector Harness for 2008 Nissan Pathfinder With Existing 4-Pole ConnectorIf your existing 4 pole utilizes the jumper harness and relays shown in the provided photo, you could simply use part # 118282 which provides the actual 7-way and the pigtail needed to install it into the tow package wiring at the rear of the truck. The jumper harness and relays plug into the factory connector located behind the passenger side kick panel next to where the front passenger's right ankle would be. If you don't already have a brake controller in mind, I'd recommend a reasonably...
view full answer...
- 7-Way and Brake Controller Recommendation for a 2006 Nissian XterraTo install a 7-way on your 2006 Nissan Xterra that currently doesn't have a trailer connector you would want the Tow Ready Wiring Harness part # 118266. This comes with everything needed to install the 7-way. Next you will need a brake controller and an install harness. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. The correct harness you would...
view full answer... - How to Install a Brake Controller on a 2004 Nissan TitanThe first thing you are going to want to do to install a brake controller on your 2004 Nissan Titan is look for a brake controller plug-in port under the driver side kick panel (see video). If you do have this port then the process to install a brake controller is going to be relatively easy but if you do not have this port then a bit more work will be involved. For a brake controller, I recommend the Tekonsha Primus IQ Trailer Brake Controller part # TK90160. If you have the brake controller...
view full answer... - Parts Needed to Install 7-Way and Trailer Brakes Controller in 2006 Nissan TitanIn your 2006 Nissan Titan that did not come with a factory 7-way wiring set-up you can install a trailer brake controller like the popular Prodigy P2 # 90885 using the quick-connect wiring adapter # 3050-P that plugs in between the controller and the port that is under your dash. The only other item you will need is the 7-way socket and relay kit # N40975. Please refer to the linked videos showing installations in a Nissan vehicle.
view full answer... - Recommended Wiring Harness And Brake Controller for 2008 Nissan Pathfinder With Factory Tow PackageFor your 2008 Pathfinder I recommend the T-One Wiring Harness with a 7-way trailer connector, part # 118266. This harness plugs into the existing wiring on your Pathfinder and that measns no cutting or splicing into the wiring. This gives you a 7-way at the rear of your vehicle. I also recommend the Pollak mounting bracket, part # PK12711U. The # C56226 harness will also work with your vehicle but we have had very good reviews from customers when using the T-One harness. When working with...
view full answer... - Can the Tekonsha PowerTrac 39523 Install In a 2009 Nissan Armada with 7-wayYes, for your 2009 Nissan Armada you can install the Tekonsha PowerTrac brake controller part # 39523 with the install harness part # 3050-P. I attached an install video that shows the # 3050-P being used to install a similar brake controller in a similar Nissan as yours.
view full answer... - Parts Needed to Install Brake Controller in 2017 Nissan ArmadaYou should be able to install the Tekonsha Voyager brake controller part # 39510 in your 2017 Nissan Armada with the install harness part # 3050-P and the 7-way install kit part # N40975 as our understanding is that every Armada in 2017 came wired for this setup. Other option is to hardwire the brake controller with first wiring in a 4-way like part # C59236 and then using the kit part # ETBC7 to adapt this 4-way to a 7-way and allow you to hardwire in the controller. Check out the install...
view full answer... - Parts Needed to Tow Trailer with 2008 Nissan XterraFirst lets start with the hitch. For that the Curt hitch part # 13514 is a confirmed fit that would work well with plenty of capacity. I attached an install video for more info as well. For trailer wiring you then would want the 7-Way kit part # C56226 which is a confirmed fit. Video for this as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup....
view full answer... - Trailer Hitch Receiver and Wiring Harness for a 2017 Nissan Titan with No Tow PackageEven though your 2017 Nissan Titan doesn't have the tow package it should still have the standard round connector to install trailer wiring behind the rear bumper. Part # N40975 includes the 7-way and 4-way connector that plugs right into your truck, as well as the relays to installto activate the wiring. I've linked a video that shows the install on a 2010 Titan for you. The process is the same. With a trailer that large it's likely to hve brakes so you need a brake controller. I...
view full answer... - Brake Controller and Harness Recommendation for a 2012 Nissan XterraI would recommend you go with the Prodigy P2 Brake Controller # 90885 and the 3050-P harness that you referenced. The P2 is one of our best selling controllers because of how easy it is to setup and how well it works. The # 3050-P will simply plug into the back of the brake controller and then plug into the port under the dash.
view full answer... - Brake Controller Installation Video Request for a Nissan PathfinderI have a video that I attached to the right that shows a very similar brake controller as the P3 part # 90195 being installed in a very similar Nissan Pathfinder as your 2014 model using the same install harness part # 3050-P.
view full answer... - Wiring Required to Install Brake Controller on 2014 Nissan Frontier Without Tow PackageI spoke with my contact at Tekonsha and the Tow Package Wiring Harness Kit with Relays, # 118266, is exactly what you will need in order to install a brake controller on your 2014 Nissan Frontier. This kit plugs directly into the factory connectors on your vehicle. Additional vehicle wiring is not required. When it comes to the brake controller, I recommend going with the Tekonsha Prodigy P3, # 90195, with Plug-In Wiring Adapter, # 3050-P. This brake controller activates immediately and...
view full answer... - Troubleshooting Tekonsha # 90885 P2-Brake Controller Install on 2014 Nissan XterraFirst, unplug the # 3050-P connector from the rear of the controller, and use a circuit tester like part # PTW2993 to test the pin fed by the black wire. If you're getting power, make sure the pin is correctly aligned. If you're not getting power, unplug the harness from the connector under the dash, being sure to note which pin the black wire connects to. Use the circuit tester on the pin that the black wire connects with. If you get power on the connector, check the end of the 3050-P...
view full answer... - Recommendation of Brake Controller for 2009 Nissan Titan to Activate Electric Brakes on Car HaulerTo operate the electric brakes on your trailer you will need to install a brake controller in your 2009 Nissan Titan XE. Our most popular brake controller that I would recommend is the Tekonsha Prodigy P2 Brake Controller, part # 90885. This is a proportional brake controller that will apply power to your trailers brakes in proportion to the vehicles braking. I am including a link to the installation instructions on the Prodigy P2 brake controller. Since you have a factory tow package...
view full answer... - How to Complete the Tow Package on a 2011 Nissan XterraThank you for submitting your pictures. It looks like your 2011 Nissan Xterra was pre-wired for the factory tow package. The only additional item that you will need to complete the tow package is the Tow Ready Nissan Custom Wiring Harness, # 118266. The gray and black plugs on the harness for the 7-way trailer connector will plug into the black and gray connectors that you found behind your rear bumper. The additional jumper harness will install behind the passenger side kick panel to provide...
view full answer...
- Can the Hopkins Agility Brake Controller # HM47294 Be Installed Upside-DownAccording to the installation instructions, the Hopkins Agility Brake Controller you mentioned can only be mounted between + 70 and - 20 degrees of the direction of travel, as shown in the diagram I provided. Installing the controller in any other orientation will cause the accelerometer in the unit to malfunction, resulting in poor or no braking. The Tekonsha Prodigy P2, part # 90885 can be mounted in a 360 degree orientation, which means that it can be mounted upside down as long is...
view full answer...
- Recommendation of Under Bed Goose Neck Trailer Hitch & Brake Controller for a 2002 Nissan TitanFor your 2004 Nissan Titan SE 4-door crew cab, the under bed gooseneck trailer hitch we carry is the Curt, part # C620-664. The gross towing weight is 30,000 pounds. The 4-inch offset ball we recommend is Curt # C602. The 4-inch offset ball will add clearance between the back bumper of the truck and the front of the trailer.. It will work with a ball size of 2-5/16 inches. And lastly a brake controller. I recommend the Tekonsha Prodigy P3 trailer brake controller # 90195. It includes...
view full answer... - Trailer Hitch Receiver and Wiring Harness for a 2020 Nissan Titan Without Tow PackageEven though your 2020 Nissan Titan doesn't have the OEM tow package it should still have the factory connector behind the rear bumper to install trailer wiring. I suggest the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector, # N40975 from Hopkins. This includes both a 7-way and 4-way connector that plugs right into your trucks existing connection. It also has all needed relays to activate the wiring. Please note the linked product review and installation video below,...
view full answer... - Will Adding a 7-Way and Brake Controller Void Warranty on 2015 Nissan Frontier Pro-4X King CabYes, Curt trailer wiring harness # C56226 does have slightly hire wire gauges for 12 volt power and brake circuits due to the higher power demand from those circuits. I am not sure why the muffler would have to come off to install the harness. If the 2015 Frontier is anything like the 2014 Frontier then it is not necessary. Take a look at the video I have linked on a similar harness. It is possible that he was talking about adding the factory towing package but I can't say for sure. If...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Dustin K
Video by:
Chris R
Video by:
Schuyler H
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Ryan G
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bill G.
6/4/2018
works perfectly