Ground Clearance When Installing Draw Tite Hitch on 2016 Nissan Pathfinder

Question

Question:

I have a 2016 Nissan Pathfinder and was thinking about the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2 Item # 76031 and looking for ground clearance measurements Thanks

asked by: Brian

0

Expert Reply:

When we installed the Draw Tite hitch part # 76031 on a 2016 Nissan Pathfinder like yours we found that from the top of the hitch opening down to the ground measured 14 inches. So from the bottom of the hitch it would be more like 11-3/4 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

You will still be able to use the hands-free lift gate sensor on your 2017 Infiniti QX60 with the Draw-Tite Max-Frame #76031 installed. It won't be necessary to move it; simply perform a kicking motion and the lift gate feature will perform as…

view full answer...

Answer 2

To install the Draw-Tite Max-Frame Trailer Hitch Receiver #76031 on your 2017 Nissan Pathfinder you will need the following tools per the installation instructions: Safety Glasses Ratchet 18mm Sockets Torque Wrench 6" Socket Extension Although…

view full answer...

Answer 3

Nope; to install a brake controller on a 2014 Infiniti QX60 you will need to start by adding a 4-way #118670 as well as the Universal Installation Kit for Trailer Brake Controller #ETBC7, which comes with the rest of the necessary components to add a…

view full answer...

Answer 4

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 5

Since there can be many connectors under a vehicle dash, I suggest you test the connector you've found to confirm it is indeed for a brake controller. A brake controller port will have four wires/contacts and one of these will carry 12V at all…

view full answer...

Answer 6

All 2013 Nissan Pathfinders came pre-wired for a tow package, so we know your Pathfinder at least has something. If your Pathfinder came with the tow package option from the dealer, then you would have a trailer hitch and trailer wiring at the back…

view full answer...

Answer 7

Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part #76031 installed. However, in order to activate this feature you will need to place your foot on…

view full answer...

Answer 8

All 2020 Nissan Pathfinders come from the factory prewired for a brake controller and a 7-way trailer connector, though it might lack the 7-way and the relays needed to activate the tow package. You will need a brake controller. If your vehicle…

view full answer...

Answer 9

All the 2018 Nissan Pathfinders have the factory tow package, but it just needs to be activated. To do that you just need to add the fuses that come with the correct wiring harness, which is the Curt T-Connector Vehicle Wiring Harness with 4-Pole…

view full answer...

Answer 10

For your 2024 Honda Odyssey I would recommend the Hidden Hitch part #DT76GR if you wanted a totally hidden hitch that has a removable lower opening. This would give you a totally hidden hitch when not in use but it does cost a bit more. For a similar…

view full answer...

Answer 11

Yes, the Curt Trailer Hitch Receiver #C33NR is confirmed to fit your 2023 Lexus NX 350h! If you let me know what you plan on using it for I'd be more than happy to make an additional recommendation for you.

view full answer...

Answer 12

We do have a trailer hitch receiver that fits your 2024 Nissan Pathfinder, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C46DR

view full answer...

Ground Clearance When Installing Draw Tite Hitch on 2016 Nissan Pathfinder

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching