Upgrading Small Utility Trailer Incandescent Lights To LED Trailer Lights
Question:
Am replacing 2 of these on my small utility trailer. No license plate required. Originally have incandescent and broke one. My original wiring harness has the ground wire white is grounded to the tongue. These leds have a ground wire attached to the light itself. Is there any consequence if I ground these lights in addition to the existing ground? Also, the original harness kit has a brown and yellow wire on driver side. Is it safe to assume that I can go brown to brown and yellow to green? Thanks for your help.
asked by: Ruth
Expert Reply:
I think you will be very happy with an upgrade in your lights to the LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Rectangle - Red Lens - Passenger, # STL56RB and the # STL57RB for the driver side.
You can ground the lights independently to your trailer.
Many wiring harnesses have the brown and yellow combination like you mentioned and it is most likely the case that you can connect the brown to brown and yellow to green as you mentioned, however I can't say that it is a definite. Many times people have re-wired trailers for specific functions that would throw the traditional applications for a loop. You will want to check the function before splicing the new lights in.
Products Referenced in This Question
LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 3-1/2W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Rectangle - Red Lens - Passenger
- Trailer Lights
- Tail Lights
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 3-1/2W Inch
- Red
- Optronics
more information >
Continue Researching
- Video: Optronics Trailer Lights - Tail Lights - STL57RB Review
- Shop: LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side
- Search Results: wire stripper
- Q&A: Rewiring Boat Trailer for 7-Way to Use LED Lights
- Q&A: Inlet Shank Spacing For The Empire Faucets Hybrid RV Bar Faucet # EM46FR
- Video: Review of Empire Faucets RV Faucets - Brushed Nickel Dual Teacup Handle RV Bar Faucet - EM73FR
- Video: Optronics Trailer Lights - Tail Lights - STL59RB Review
- Video: Optronics Trailer Lights - Tail Lights - STL9RB Review
- Video: Empire Faucets RV Bar Faucet Review and Installation
- Video: Optronics LED Combination Tail Light Kit Installation
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 9 Diodes - Red Lens
- Shop: LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
- Shop: Empire Faucets Hybrid RV Bar Faucet - Dual Teacup Handle - Chrome
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Empire Faucets Hybrid RV Bar Faucet - Dual Teacup Handle - Brushed Nickel
- Shop: Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side
- Video: Review of Optronics Trailer Lights - Tail Lights - STL0066RBG
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer lights
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: tail lights
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Most Popular Wheel Bearings
- Shop: RV Exterior Lighting
- Search Results: lug nut