Connecting Ground Wires From Optronics 25' Trailer Wiring Harness With Tail Lights Ground Strap
Question:
I recently bought the Optronics TLL160RK along with the Optronics 25ft trailer harness. I already have a connection for the harness on my truck but I’m curious if I would need to connect the ground on the 4 pin as both lights already come with grounds on them? TIA
asked by: Cody S
Expert Reply:
You have 2 options for your 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB when wiring in the Optronics LED Combination Trailer Tail Lights # TLL160RK.
First is the way I recommend since the harness has the full length ground wires is to cut off the eyelet on the tail lights and wire the ground from the tail lights to the harness. Heat Shrink Butt Connectors # DW05744-10 are the best option for a weather tight connection. If you have any side marker lights they will also need connected to ground wires.
The other option is to go ahead and ground the ground wires on the harness to the trailer frame. While many think they do not need a ground connection on the trailer since you have a steel ball connected to a steel hitch and steel frame the paint used on these surfaces is often too thick for the very low draw of the LED tail lights.
Products Referenced in This Question
25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 21 - 30 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 8L x 3W Inch
- Red
- Optronics
more information >
Continue Researching
- Video: Optronics Uni-Lite LED Clearance and Side Marker Light Review and Installation
- Video: Optronics LED Trailer Tail Light Installation stl14rb
- Q&A: Why Does Trailer's Wiring have Two Brown Wires
- Search Results: boat trailer tail lights
- Search Results: trailer light
- Search Results: boat trailer brake lights
- Search Results: waterproof led boat trailer lights kit
- Search Results: boat trailer light kit
- Search Results: trailer running lights
- Search Results: running light
- Shop: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Shop: V-Shaped Identification Light Bar for Boat Trailers - Submersible - Red LEDs - Red Lens
- Shop: LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Red Lens
- Shop: LED Combination Trailer Tail Light - 6 Function - Submersible - 12 Diodes - Passenger Side
- Shop: Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Shop: GloLight Uni-Lite Mini LED Clearance or Side Marker Light - Submersible - Round - Amber Lens
- Video: Optronics Wiring - Trailer Connectors - A25W2GWB Review
- Video: Optronics 25 Ft 4-Way Trailer Wiring Harness Review
- Q&A: Grounding a 4-Way Wishbone Trailer Connector
- Q&A: How To Connect Ground Wires On Snowmobile Trailer With Thick Steel Frame?
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller