What B and W Gooseneck Hitch Fits a 2009 Chevy Silverado 1500

Question

Question:

Will a bandw turnover ball hitch from 2007 chev 2500 fit a 09 chev 1500.

asked by: Keith P

0

Expert Reply:

Because the one truck is a 2500 and the other is a 1500 the two would not share the same gooseneck fits. For the 2009 Silverado 1500 you would need the part # BWGNRK1057.

I attached an install video for more info for you to check out as well.

expert reply by: Jameson C

0

Answer 1

My B&W representative tells me that the 2007 Silverado (New Body or Classic Model) use a different Turnover Ball Hitch than the 2008 Silverado 2500. But, the good news is that instead of getting a whole new hitch, you can retain the center…

view full answer...

Answer 2

The #BWGNRM1067 install kit fits up to the 2010 model year, so it won't work with your 2012 Silverado 2500HD. For your truck, you'd need the #BWGNRM1012 install rail kit along with the #BWGNRC912 center section. If you'd like…

view full answer...

Answer 3

If you have the center section of a B and W Turnoverball Gooseneck hitch already but need the hitch part #BWGNRK1067 all you need for the rails is the #BWGNRM1067 which is just the rails of that hitch kit.

view full answer...

Answer 4

The B and W bracket kit part #BWGNRM1057 is the correct bracket kit for your 2008 Chevy Silverado 1500 as it is what comes with the part #BWGNRK1057 which is the brackets and the hitch center section. If you already had the part #BWGNRC959 then all…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The #TLC3205 you have now is only designed to work with the factory hitch. Whether it is the #DT45517, a Curt hitch, or even a TorkLift hitch you will need a different rear tie-down. The correct rear tie-down for a 2002 Silverado 2500 without a board…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Yes! I went ahead and attached the installation instructions of the Demco Underbed Rail and Installation Kit #DM8551004 (Demco part 8551004) to this answer.

view full answer...

Answer 12

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

What B and W Gooseneck Hitch Fits a 2009 Chevy Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching