Information Needed to Pick out Replacement Wheels and Tires for Trailer
Question:
looking for new tires and wheels for Trailstare trailer used with 1996 18foot tracker Bass buggy
asked by: Ed.burney@att.net
Expert Reply:
The first thing you will need to determine is the bolt pattern of the hubs you have on your trailer. To do this check out the help article I attached. With this information you will know what wheels can bolt up to the hubs of your trailer.
From there you will want to check out the other link I attached that will take you to a page that has all of the wheel and tire combos we offer. You will want to select your bolt pattern from the filter and all of the rim/tires we offer that fit will be listed.
The part # AM3H490 you referenced is a 205/65-10 tire mounted on a wheel with a 5 on 4-1/2 inch bolt pattern. If that matches what you have this would be a great option.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Search Results: winch stand
- Search Results: 20.5x8.0 10 tire
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Article: Most Popular Wheel Bearings
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H330 Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Trailer Wiring
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Measuring a Trailer Tire
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: 12 x 20 lug nuts
- Search Results: 3500 axle
- Search Results: st20575r15
- Search Results: lug nuts 1 2 20
- Search Results: trailer axle 72
- Q&A: How Many Revolutions will a 20.5x8x10 or 205/65-10 Trailer Tire Turn in One Mile
- Q&A: Tire Speed Rating for the Kenda 205/65-10 Bias Trailer Tire with 10
- Q&A: Spare Tire Recommendation for a Dual Jet Ski Trailer with 205 x 65 x 10 Load Range E Tires
- Q&A: Recommended Tire for a 20-Foot Pontoon Boat Trailer Traveling Down the Highway
- Q&A: Should the Original Wheels and Spare Tire Be Replaced on a 1989 Jayco King 6 Pop Up Trailer
- Q&A: Recommended Tire and Wheel Combo to Replace a 20.5-8 x 10 Tire
on Trailer Tires and Wheels
