Recommended Trailer Hitch For 2011 Subaru Legacy
Question:
I wood like to buy trailer hitch for 2011 Subaru legacy I need to now wich one to bay
asked by: Petre G
Expert Reply:
We offer Class ll and Class lll trailer hitches for your 2011 Legacy. I recommend going with the Class lll because it gives you many more options when attaching any accessories like cargo carriers or bike racks.
The trailer hitch I recommend is the Draw-Tite Max-Frame Trailer Hitch, part # 75673. This is a Class lll hitch and it has a 2-inch receiver opening. When installed, the distance from the center of the hitch pin hole to the back of the bumper is 4-1/2 inches. You will need to know this if you intend to use the hitch for a bike carrier or any other accessory to make sure you have the clearance.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
If you need a trailer wiring harness I recommend part # 118511. When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
I have attached a couple links to some of the bike carriers and cargo carriers we offer that are designed for 2-inch receivers. If you have any questions about a specific item let me know and I will be glad to make some recommendations that will work for you.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Video: Trailer Hitch Installation - 2011 Subaru Legacy - Draw-Tite
- Q&A: EcoHitch Receiver Hitch for 2019 Subaru Legacy
- Q&A: Will the Yakima HoldUp EVO 2 Fit a 2016 Subaru Legacy
- Q&A: Trailer Hitch Recommendation for 2015 Subaru Legacy with Good Ground Clearance
- Q&A: Recommended Trailer Hitch and Wiring for 2016 Subaru Legacy
- Q&A: Will the Thule Gateway Trunk Mount Bike Rack Fit a 2012 Subaru Legacy with Factory Spoiler
- Q&A: Comparing the Curt and Draw-Tite Trailer Hitches for a 2020 Subaru Legacy
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams