What are the Measurements of the Valterra T1003Vp Sewer Valve

Question

Question:

Please advise the dimension of Valterra T1003VP Sewer Valve - 3inch

asked by: Michael L

1

Helpful Expert Reply:

I've included a measurement diagram of the Valterra Sewer Valve # T1003VP. It is a standard RV waste valve.

expert reply by: Charles S

1

click to enlarge

Answer 1

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

view full answer...

Answer 2

What valve do you currently have on your RV? Most gray water tanks have a 1-1/2" valve. The Valterra Bladex Waste Valve Body for RV Gray Water Tank -with Aluminum Handle - 1-1/2" Diameter, #T1001VPM is a very cost effective replacement.…

view full answer...

Answer 3

Thank you for your purchase from etrailer of the Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter #T1003VP. As you can see from the accompanying photo, it is normal for their to be a little space on each…

view full answer...

Answer 4

You can replace just the valves on the Double RV Waste Valves part #T80. For the black water you can use the Valterra Bladex Waste Valve Body part #T1003VP and for the grey water tank you can use the Valterra Bladex Waste Valve Body part #T1001VP.

view full answer...

Answer 5

The Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug #T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" #T1005-1 to match the original hub. This secures to your pipe with solvent #A05-0303. The…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You as the consumer wouldn't be able to adjust the puck system as it's typically welded to a frame that's attached to the vehicle's frame. Manufacturers do make mistakes so you could have a bad puck system from the factory and would…

view full answer...

Answer 8

While in theory, you would be able to use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005 to switch from one propane tank to another while using your generator. The issue actually comes from the generator and more specifically the…

view full answer...

Answer 9

The Lippert Flow Max RV Toilet #LC67AF requires approximately 11-1/4" of space from the wall to the center of the drain.

view full answer...

Answer 10

The Ultra Breeze Trailer Roof Vent Cover which fits over your Dometic vent FV1400 is available in Black #DMC38FR or White #FVU1500WH. These covers are custom molded so the vent lid fits into the cover when opened.

view full answer...

Answer 11

Yes, the Camco RV Wastewater Tank Replacement Valve #CAM39513 is threaded. Another option is the Valterra Bladex Waste Valve #T1003VP, which like the Camco is a manual single waste valve with a 3" diameter.

view full answer...

Answer 12

I agree, that note doesn't make sense. When I reached out to my contact at MORryde they said the MORryde RV Generator Slide Out Tray #MR79RR doesn't have a stopper for when the tray is in the fully opened position so you just need to make…

view full answer...

What are the Measurements of the Valterra T1003Vp Sewer Valve

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching