Replacement 1-1/2 Inch Hub and Valve for Valterra T80 Double RV Waste Valve Elbow
Question:
Which replacement hub for the 1.5inch side is correct? T1006 or T1005? I havent had any luck finding the dimension on the T80 for comparison. Thank you!
asked by: Todd H
Expert Reply:
The Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" # T1005-1 to match the original hub. This secures to your pipe with solvent # A05-0303. The Valterra RV Sewer hub # T1006-1 will also fit but is designed to fit differently than the T80 original connection so it can be a replacement part as well. I've attached a video to help with the dimensions and a couple photos to further assist with dimensions of the other products.
If you need the replacement valve body use # T1001VPM for the replacement or if you want a cable with handle use # T1001PBC along with # TC72PB.
Products Referenced in This Question
Valterra ABS Solvent Cement - 1/4 Pint
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- ABS Cement
- Valterra
more information >
Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 1-1/2 Inch Valve Body
- Stationary Valve
- Valterra
more information >
Valterra RV Sewer Slip Hub with Flange - 1-1/2"
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- Slip Hubs
- Hub
- Sewer Pipe to Waste Valve
- 1-1/2 Inch Diameter
- Valterra
more information >
Valterra RV Sewer Spigot with Flange - for 1-1/2" pipe
- RV Sewer Hose Fittings
- Sewer Couplers and Nipples
- Pipe Couplers
- Spigot
- Sewer Pipe to Waste Valve
- 1-1/2 Inch Diameter
- Valterra
more information >
Valterra Cable with Valve Handle - 72"
- Accessories and Parts
- RV Waste Valves
- Waste Valve Parts
- Cable Kits
- 72 Inch Long
- Valterra
more information >
Product Page this Question was Asked From
Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug
- RV Waste Valves
- Sewer Elbow
- Double Waste Valve - Manual
- 1-1/2 Inch Hub
- 3 Inch Hub
- Rotating Valve
- Valterra
more information >
Continue Researching
- Shop: Valterra RV Sewer Slip Hub with Flange - 1-1/2"
- Shop: Valterra RV Sewer Slip Hub with Flange - 3"
- Video: LaSalle Bristol RV Sewer - Waste Valves - 34466ND13AAR Review
- Q&A: What Flange Fits Valterra Street DWV Fitting # D50-2880
- Shop: LaSalle Bristol Double RV Waste Valves - Elbow - Rotating - 3" Hubs
- Shop: Valterra RV Sewer Spigot with Flange - for 1-1/2" pipe
- Q&A: Dimensions Of Valterra Double Rotating Waste Valve # T80
- Shop: Valterra DWV Coupling for RV Sewer System - ABS Plastic - for 1-1/2" pipe
- Shop: Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug
- Shop: LaSalle Bristol RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot
- Video: Valterra RV Sewer System Elbow DWV Fitting Review and Installation
- Video: Valterra RV Sewer - Connectors and Fittings - T1005 Review
- Video: Review of Valterra RV Sewer Hose Fittings - 1.5 Inch Sewer Slip Hub with Flange - T1005-1
- Video: Valterra RV Sewer - Connectors and Fittings - T1006 Review
- Video: Review of Valterra RV Sewer Hose Fittings - Sewer Adapters - Sewer Couplers and Nipples - T1041-1
- Shop: RV Interior Lighting
- Video: Valterra RV Sewer - Connectors and Fittings - T1029-2 Review
- Search Results: black tank fittings
- Search Results: puck light
- Search Results: skylight
- Search Results: tank fittings
- Search Results: slide seals
- Shop: RV Camera
- Q&A: How to Install the Valterra Cable with Valve Handle # TC72PB
- Shop: RV Roof Membrane
- Q&A: What is the measurement from end to end? Left to right?
- Search Results: stabilzer jack
- Search Results: dexter trailer lift kit
- Article: How to Raise Your Travel Trailer Height
- Q&A: Picking Out Replacement Seals for Valterra 1-1/2 inch Diameter Waste Valve