Recommended Trailer Hitch For 2012 Chevrolet Sonic

Question

Question:

I cant figure out which hitch to purchase for my 2012 Chevy Sonic. I see there are two options. One for a sportframe and one for ordinary ?. My Sonic is an LT, 6-speed manual, turbo. Can you tell me? Or how do I figure this out? Thanks,

asked by: Amy

0

Expert Reply:

There were two models of the Chevrolet Sonic lt in 2012. One is a 4-door sedan and the other model is a 5-door hatchback.

If you have a 4-door sedan then the trailer hitch I recommend is the Curt part # C11240. This is a Class l trailer hitch and it has a 1-1/4 inch receiver opening.

For a 5-door hatchback I recommend the Draw-Tite # 24878. This is also a Class l hitch with a 1-1/4 inch receiver opening.

If you end up with a Curt hitch, Curt requires a stabilizing strap like part # 18050 when using an unsupported load like a bike rack or cargo carrier. You would not use this with a trailer.

If you are planning on doing some light towing with your Sonic I recommend a ball mount like part # C45019. This ball mount features a 5/8 inch rise or 1-1/4 inch drop. If you need a 1-7/8 inch hitch ball I recommend part # C40001 and for a 2-inch hitch ball you can use part # C40018.

For a trailer wiring harness I recommend the T-One Trailer wiring Harness, part # 118640.

If you plan on carrying a bike carrier in the hitch I recommend the Swagman XTC-2 2-Bike Platform Rack, part # S64670.

expert reply by: Jeffrey L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Recommended Trailer Hitch For 2012 Chevrolet Sonic

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching