How Can I Tighten the Fit Between My Trailer Hitch and Bike Rack

Question

Question:

Loose fit between the hitch and our bike rack. Do you sell shims that may fit in to tighten up the fit?

asked by: Bob T

1

Helpful Expert Reply:

I have the perfect solution for you. Check out the Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers # PS63091. This device inserts between the receiver and your bike rack, then tightens down with included bolt and jam nut.

If you are using a bike rack for a 1-1/4 hitch, you would use a similar product # RM-061-125.

Check out the videos of these products.

Also, if you tell me what bike rack you have, I may have other more specific solutions for your setup that could help.

expert reply by: Charles S

1

Answer 1

The most common lug nut socket sizes for trailers are as follows; 13/16", 7/8", 17mm, and 19mm. I would be willing to bet you need a 13/16" socket but in order to be sure you get the correct size you should consider the Telescoping Lug…

view full answer...

Answer 2

The frost heaves you are referring to can get pretty nasty on the Alcan so the fact that your Yakima FullTilt 5-Bike Rack has taken a beating is unfortunate but not surprising, just because of the extreme rough patches you will inevitably encounter.…

view full answer...

Answer 3

Hitch accessories tend to wobble, especially those that use a 1-1/4 inch to 2 inch adapter. The threaded hitch pin can only do so much to combat the movement. The issue is that the shank of the accessory has to be slightly smaller than the opening…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How Can I Tighten the Fit Between My Trailer Hitch and Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching