Installation of Mounting Rail for Camco RV Grill

Question

Question:

What is the best way to attach this to the side of a fiberglass trailer? Other than making sure there are no wires or pipes in the way, what other things need to be considered ?

asked by: Ryan

0

Expert Reply:

You will want to make sure that you have proper support behind the fiberglass location you plan on mounting this rail too. I was able to go out to the warehouse and find that on the product Camco recommends this product be installed by a qualified RV dealer. I have attached an image of the tag for you to better see the details.

It states: This mounting strip WILL NOT support the weight of the grill or other devices if only screwed into the skin of the RV. It may be attached to the skin of the RV only if adequate support structure ( to support grill or other ) is behind the skin. In some cases a backing plate will be required. Car must be taken to not penetrate hidden gas, electrical, fresh water or waste lines when mounting. Care must also be taken to not drill/screw through the interior wall of the RV.

I have linked the mounting rail to this page for your convenience.

expert reply by: Jackie C

0

click to enlarge

Answer 1

I believe you are referring to the Camco RV Grill Mounting Rail #CAM57268, which is what will permanently install on the wall of your camper/RV to use for an attachment point for the brackets on the Aussie Portable Gas Grill #277-000091 that you…

view full answer...

Answer 2

The Camco Olympian 5500 Stainless Steel RV Propane Grill #CAM57305 has a propane connector that accepts an RV's low-pressure male quick-connect propane fitting. The items my Camco contact recommends are Propane Hose #CAM57629 and Propane…

view full answer...

Answer 3

Adding electric brakes to your Pacific Boat Trailer is definitely a good idea and you do have most of the parts needed, but there are a couple other parts I recommend. On the vehicle side, with your 2019 GMC Yukon XL having the tow package definitely…

view full answer...

Answer 4

You can add a 7-way to your 2002 GMC Sierra 1500; it sounds like you have the bundle of wires above the spare tire (see linked help article). What you can do is use the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring…

view full answer...

Answer 5

On some vehicles, the key has to be on for voltage to go back to the trailer connector. On others, it does not. An electric brake controller will always send back some minimal voltage to the trailer connector. This is how it senses if there is a…

view full answer...

Answer 6

I will start by saying that Camco highly recommends that the Camco RV Grill Mounting Rail #CAM57268 is installed by a qualified RV dealer. However, if you are going to install the rail yourself; there is not a "set" way for installation.…

view full answer...

Answer 7

Thank you for the photo of your set up, and while we do have an option for a high-quality grill that will allow you to cook outside your RV, there isn't a grill that will fit in the exact mounting arm you have. So the best option we can offer is…

view full answer...

Answer 8

The Taskmaster Off Road tire part #TA45RR was designed to fit a 6 inch wide wheel that is 15 inch in diameter. Based on your current tire size of 205/75-15 this would fit your current wheel.

view full answer...

Answer 9

That portion would be grill specific. While the Camco RV Grill Mounting Rail #CAM57268 is a universal rail that works with most grills the other parts are not as universal.

view full answer...

Answer 10

The Camco RV Grill Mounting Rail part #CAM57268 is designed to be used with a rail on an RV grill like the Faulkner BBQ Grill part #FR51323. You would need to obtain a bracket similar to that on the grill and attach that to the table as the Camco RV…

view full answer...

Answer 11

We don't carry either disc included with the RAS kit, part #RAS3611-Y, as replacement parts, however you can find both of them almost anywhere for only 35 cents. According to my contact at RoadActive Suspension you can use a quarter to replace…

view full answer...

Answer 12

As long as you have the generator secured on the Stromberg Carlson Trailer Tray Cargo Carrier, part #CC-255, you can run the generator while it is mounted on the carrier. If the generator needs to be grounded with a grounding rod it's probably…

view full answer...

Installation of Mounting Rail for Camco RV Grill

Product Page this Question was Asked From

Continue Researching