Propane Hose and Adapter for Camco Olympian 5500 Stainless Steel RV Propane Grill CAM57305

Question

Question:

I have a Olympian/Camco 5500 grill for low pressure systems. I would like to hook it up to a 1lb throwaway propane cylinder as well as a 20lb. Can you let me know that parts that I need? Thanks!! Matt

asked by: Matt

0

Expert Reply:

The Camco Olympian 5500 Stainless Steel RV Propane Grill # CAM57305 has a propane connector that accepts an RV's low-pressure male quick-connect propane fitting. The items my Camco contact recommends are Propane Hose # CAM57629 and Propane Adapter # CAM59213.

expert reply by: Adam R

0

Answer 1

You will want to make sure that you have proper support behind the fiberglass location you plan on mounting this rail too. I was able to go out to the warehouse and find that on the product Camco recommends this product be installed by a qualified RV…

view full answer...

Answer 2

The Camco Olympian 5500 Stainless Steel RV Propane Grill #CAM57305 is intended for use with a low-pressure propane source. It includes a knob for gas flow regulation much like a standard home gas grill does. It is not uncommon for a very full propane…

view full answer...

Answer 3

Trailer tires should always be inflated to the maximum psi indicated on the tire sidewall. This is because trailer tires are built with a thicker sidewall than passenger vehicle tires to handle more vertical load. If under inflated the thicker…

view full answer...

Answer 4

Sounds like you would like to be able to use the Camco Olympian 5500 Stainless Steel RV Propane Grill #CAM57305 with a disposable propane tank that uses the screw on style fittings. All you would need to do that is the part #CAM57629 and adapter…

view full answer...

Answer 5

As you noted, you can't have the propane supply going through two regulators as it would not supply the correct pressure that your griddle needs to function properly. It doesn't look like the the propane regulator on the 36-inch Blackstone…

view full answer...

Answer 6

For the Camco grill part #CAM57305 that you referenced we do have the replacement Gas Control Valve part #CAM57274 available.

view full answer...

Answer 7

The Camco Grill part #CAM57305 is designed to be ran on LP or low pressure propane so you could use the MB Sturgis regulator part #CAM59013 and you'd be set.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Propane Hose and Adapter for Camco Olympian 5500 Stainless Steel RV Propane Grill CAM57305

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching