How is the Camco RV Grill Mounting Rail Installed

Question

Question:

How do you mount the slide rail on the RV for an Aussie grill

asked by: Kevin R

0

Expert Reply:

I will start by saying that Camco highly recommends that the Camco RV Grill Mounting Rail # CAM57268 is installed by a qualified RV dealer.

However, if you are going to install the rail yourself; there is not a "set" way for installation. This is because every RV is going to be different. The rail gets screwed onto the RV. But you have to take care to not penetrate hidden gas, electrical, fresh water or waste lines when mounting. Also, avoid drilling through the interior wall of your RV.

The rail also needs to be installed with support behind the outer wall/skin of the RV. It can not be attached to just the outer wall/skin. It needs to be screwed into supports and of you do not have enough support(s), a backing plate may be required.

expert reply by: Scott S

0

Answer 1

You will want to make sure that you have proper support behind the fiberglass location you plan on mounting this rail too. I was able to go out to the warehouse and find that on the product Camco recommends this product be installed by a qualified RV…

view full answer...

Answer 2

Sounds like you are looking for an RV grill mounting rail like the part #CAM57268 for mounting your Aussie grill like the part #277-000091.

view full answer...

Answer 3

The longest Camco RV Grill Mounting Rail we have is the 16-1/2" item #CAM57268 you were looking at.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

How is the Camco RV Grill Mounting Rail Installed

Product Page this Question was Asked From

Continue Researching