Recommended Hitch and Wiring to Tow Max Capacity of 2013 Nissan Pathfinder
Question:
What hitch do I need to tow up to maximum capacity on my 2013 Nissan Pathfinder? What wiring is going to be necessary to complete? Id like it to look as factory as possible. Thanks,
asked by: Wade P
Expert Reply:
The heaviest rated hitch we have available for your 2013 Nissan Pathfinder is the Curt # C13126.
This Class III 2 inch is rated for 600lbs tongue weight and 4,000lbs towing capacity; if used in combination with a weight distribution system it will have 5,000lbs towing capacity. You will be limited by your lowest rated item which may be the capacity of your vehicle.
The Curt hitch is also going to be the hitch that looks most like the factory hitch. I have linked a picture of this hitch installed on a 2013 Nissan Pathfinder that we did the install on for you to see.
The Nissan's were wired one of three ways, with a round plug, with two square connectors, or with nothing. The wiring harness you will need if you have the factory tow package with the round connector you will want the # HM40975. If you happen to have the factory tow package with two plugs at the rear, see third image, you will need the # 118273 for a 7-way or # 118670 for a 4-way trailer plug. If you do not have the tow package you will need the # HM11143690.
Another thing you will need when it comes to towing a trailer is a ball mount and ball. You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
I have linked all the above recommended parts to this page as well as a few installation videos for your convenience.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Search Results: dielectric grease
- Search Results: trailer tester
- Search Results: 118266
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2013 Nissan Frontier
- Q&A: Does 2009 Nissan Xterra Require Converter For Trailer Wiring Harness?
- Q&A: Differences Between Curt # C56226 and Tow Ready # 118266 7-Way Connectors for 2012 Nissan Xterra
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Video: Curt 7-Way to RV Socket LED Circuit Tester Review C66NR
- Shop: Curt Replacement OEM USCAR Trailer Connector - Dual Connection - 7-Way RV Style and 4-Way Flat
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Shop: Adapter 7 Pole to 4 Pole with Tester and Cover
- Video: Trailer Connector Socket Installation - 2013 Nissan Pathfinder
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56226 Review
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Review
- Video: Trailer Wiring Harness Installation - 2017 Nissan Frontier C56226
- Video: Review of CURT Electrical Tools - 7-Way LED Circuit Tester - C73NR
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: 7-Way RV to 4-Way Flat Trailer Connector Adapter
- Shop: Brake Controller
- Search Results: c51382
- Search Results: 118282
- Shop: Trailer Hitch
- Q&A: Wiring And Relays Compatible With 2010 Nissan Pathfinder
- Q&A: 2013 Nissan Xterra 7-Way and Trailer Running Light Solution Fix
- Q&A: How to Determine if 2007 Nissan Frontier has Tow Package
- Q&A: 7-Way Trailer Connector Recommendation for a 2016 Nissan Frontier
- Q&A: Will Relays Be Needed to Upgrade Existing 4-Pole Trailer Connector on 2014 Nissan Frontier to 7-Way
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch