Trailer Connector Socket Installation - 2013 Nissan Pathfinder Video

I have a couple of options for wiring harnesses that will give you what you're asking for. There isn't a plug and play set up that has a dual 7-Way and 4-Way set up so you'll need to use two separate harnesses if you need the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

All 2013 Nissan Pathfinders came pre-wired for a tow package, so we know your Pathfinder at least has something. If your Pathfinder came with the tow package option from the dealer, then you would have a trailer hitch and trailer wiring at the back…

For your application I recommend going with the Redarc Tow-Pro Liberty Brake Controller #RED24FR because the installation location is extremely versatile and it's easy to use since it uses colors to tell you what's going on instead of…

Thanks!! I am posting them on this page to help future customers with a Pathfinder like your 2017!

You may have found the wrong connector on your 2013 Nissan Pathfinder to install the Tekonsha Plug-In Wiring Adapter #3050-P. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency…

Other than the fact that each 7-way trailer connector you mentioned is from a different manufacturer, both the #C56226 from Curt and the #118266 from Tow Ready would work identically. Either connector would work just fine on your Xterra. You could…

The heaviest rated hitch we have available for your 2013 Nissan Pathfinder is the Curt #C13126. This Class III 2 inch is rated for 600lbs tongue weight and 4,000lbs towing capacity; if used in combination with a weight distribution system it will…

If the relays and jumper harness used with the 4 pole like #C56226 (see linked install video) are already in place behind the passenger side kick panel, then the Tow Ready #118267 will work just fine. If your aftermarket 4-pole simply tee'd in at…

If a 2007 Nissan Frontier doesn't have the factory tow package then it'll need a relay harness and relays that install behind the passenger side kick panel to activate the tail light circuits such as those that come with the T-One Vehicle…

The only way to order a 7-way for your 2016 Nissan Frontier is to go with the part #C56226 which includes the jumper harness and relays. The good news is that you would have spares in case you were to damage a relay. If you happen to already have the…

Since the solution for no running lights on your 2013 Nissan Xterra is a missing relay and you also want a 7-way kit your best solution would be the part #C56226. You already have some of the relays but you'll be able to use one of the extra blue…