Availability of Westin Black Running Boards for a 2014 Toyota FJ Cruiser

Question

Question:

Are the running boards still available? If so do you have info you could share on installation. Also do you have a picture of the running boards installed on an FJ Cruiser.

asked by: Bob

0

Expert Reply:

Yes the Westin running boards # 22-5065-1615 are available for your 2014 Toyota FJ Cruiser.

The mounting brackets will attach to access holes on the frame of your vehicle just under the door panels and then the step will bolt to that mounting bracket.

We have not had the opportunity to install these on a FJ Cruiser yet so I do not have a photo to share, but I did link an installation video of a similar step being installed onto another vehicle for you to check out how they install.

expert reply by: Jackie C

0

click to enlarge

Answer 1

Thank you for the photos of your 2006 Honda Pilot, but the center bolts are still needed to install the etrailer Trailer Hitch Receiver #e98851. What you will need to do - if you can - is drill the holes in the bumper beam, though I can't…

view full answer...

Answer 2

For your 2002 Acura MDX the highest capacity trailer hitch we offer is the etrailer #e98851 which can tow a trailer up to 3,500 lbs unless you are using a weight distribution system. Then it could tow a trailer up to 5,000 lbs. This hitch does not…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Availability of Westin Black Running Boards for a 2014 Toyota FJ Cruiser

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching