Missing Bolt Holes For Hitch Install on 2006 Honda Pilot
Question:
Hitch e98851 for 2006 Honda Pilot AWD. My car doesn’t seem to have the center holes on the bumper beam. It is rusted but there doesn’t even seem to be the remnants of bolt holes. The frame seems rusted but I think if I tap the holes and clean them out it will be ok. Can I mount this hitch without the center bolts? I don’t know if my car ever had them. Photos are bumper beam midline, passenger side frame, driver side frame. Thanks
asked by: Ken K
Expert Reply:
Thank you for the photos of your 2006 Honda Pilot, but the center bolts are still needed to install the etrailer Trailer Hitch Receiver # e98851.
What you will need to do - if you can - is drill the holes in the bumper beam, though I can't quite tell from the photo if you have the needed space available there at the bumper.
Failing that, the best option for you is going to be to mount a different hitch that does not require you to use the bumper beam or center bolt holes, just the holes on the frame rail, and that would be the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Recommended Trailer Hitch Receiver Compatible with 2006 Honda Pilot 4WD
- Video: Trailer Hitch Installation - 2006 Honda Pilot - Curt
- Video: Trailer Hitch Installation - 2006 Honda Pilot - Draw-Tite
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Video: Curt Trailer Wiring Harness Installation - 2005 Honda Pilot
- Shop: Square Pipe Mount Swivel Jack w Footplate - Weld On - Sidewind - 15-1/4" Travel - 3,000 lbs
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: 814092
- Video: Trailer Wiring Harness Installation - 2005 Honda Pilot
- Video: Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118336 Review
- Shop: Vehicle Lights
- Video: Optronics GloLight Trailer Lights Manufacturer Review
- Video: Curt Trailer Wiring Harness Installation - 2007 Honda Pilot
- Q&A: What is the Ground Clearance for the etrailer Trailer Hitch for 2005 Honda Pilot
- Shop: Jeep Seats
- Q&A: Difference Between the Curt and Etrailer Hitches for a 2004 Honda Pilot
- Shop: Nerf Bars - Running Boards
- Q&A: Does Trailer Hitch Install for 2005 Honda Pilot EXL Require Lowering Exhaust
- Q&A: Can Weight Distribution be Used With a 2006 Honda Pilot
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What are the Best Roof Racks for a 2009 Honda CRV and a 2007 Honda Pilot?
- Q&A: Trailer Wiring Harness Recommendation for a 2005 Honda Pilot
- Article: My Trailer Hitch Doesn't Fit