Replacement Hitch Pin for Older Yakima ROC 1.25 Bike Rack  

You are in luck, one of our co-workers happens to have a Hollywood bike rack for Class II hitches and I checked several of the hitch pins that we have available to see if they would work with bike rack. I found that the SportRack Anti-Rattle Bike…

The Replacement Anti-Rattle Hitch Bolt #Y8890176 is a 1/2"-13 bolt with 2-1/2" of threads on the bolt.

The Yakima HitchLock for Yakima Hitch Mounted Bike Racks #Y07235 attaches to your anti-rattle bolt and keeps your bike rack locked to your hitch. An even more secure setup is the Yakima LockUp Hitch Lock and Cable Lock #Y07238. This kit not only…

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

Comparing Yakima Hitch Pins for 1-1/4 inch receivers #Y8880129 and #Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch,…

The Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers part #SR0901 should fit as a replacement and get you back out exploring. We do not carry the Transit rack it appears to have a standard sized 1/2x20 threaded bolt. I've linked…

The Replacement Mounting Hardware for Yakima HoldUp Hitch Mounted Bike Carrier - 1-1/4" Hitches #Y8880129 is a 1/2 inch diameter with a thread pitch of 13 (threads per inch). It is 4.28 inches long. I contacted the manufacturer to get their…

Replacement Hitch Bolt and Clip #Y8890200 is for racks that fit 2 inch hitches. Since your older BigHorn fits 1-1/4 inch hitches, this is not the correct pin. For the 1-1/4 inch BigHorn bike racks you can use replacement pin, clip, and lock washer…

When a key will not turn in a lock with an item like Master Lock #1480DAT sometimes a very gentle tap with a small hammer will help to fully seat the key in the tumbler. You can also try a light sanding of the key's teeth with fine grit sandpaper…

I have a solution for adapting your Yakima Holdup #Y02445 for 2" hitches, but the Yakima Holdup is not compatible with the #8880519 adapter sleeve since this sleeve is meant for use on the Yakima TwoTimer #Y02468. Adapter sleeves can be tricky…

The Yakima HitchLock for Yakima Hitch Mounted Bike Racks #Y07235 is designed to fit Yakima Replacement Hitch Pin bolts like the part #Y8890200 that you referenced.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…