Availability of Roof Vent Lid to Fit a 1984 2100 Shasta Camper
Question:
We have a 1984 model 2100 Shasta camper. I need to replace a hand crank roof vent cover in the bathroom. The one that is there is cracked. Do you have a cover replacement lid that will fit? Thank you,
asked by: Debbie C
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
The best way to find the correct replacement vent cover for your trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent.
If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03, that you referenced, then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
I have included a graphic of the various hinges for you to compare.
Product Page this Question was Asked From
Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Continue Researching
- Shop: Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White
- Video: Ventline White Plastic Enclosed Trailer Vent Cover Installation
- Video: Ventline Smoke Plastic Enclosed Trailer Vent Cover Installation
- Shop: Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke
- Search Results: 44649
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Ventline Ventadome Replacement Vent Installation
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: equalizer
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Video: Ventline Trailer Roof Vent Installation
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Search Results: 68149
- Video: Ventline Ventadome Trailer Roof Vent Installation
- Search Results: dust cap
- Shop: Brake Controller
on RV Vents and Fans
