Wiring Fit and Compatibility on a 2006 Jeep Wrangler-X

Question

Question:

Will either or both of your advertised wiring sets work with my 2006 Jeep Wrangler-X, two door?

asked by: Skip P

0

Expert Reply:

If you don't have a factory 7-way already on your vehicle the Hopkins wiring harness # 32625, the Tow Ready # 118409, or the Curt # C55363 will fit for your 2006 Jeep Wrangler-X.

I recommend the Tow Ready # 118409, because it is the most popular among our customers.

I have linked all the wiring harnesses that fit a 2006 Jeep Wranger-X without the factory tow package for your vehicle for your convenience.

expert reply by: Jackie C

0

Answer 1

We can guarantee that the Tekonsha Trailer Wiring Harness part #118409 is a fit for your 2005 Jeep Wrangler Unlimited. I attached an install video that shows this harness installed on a 2005 Wrangler just like yours.

view full answer...

Answer 2

From what I was able to learn about the 2006 Jeep LJ, from 2004 to 2006 LJ was the unlimited version and had a 10 inch longer wheel base. Both can fall under the umbrella of a Wrangler so you will be able to use Tow Ready Custom Fit Vehicle Wiring,…

view full answer...

Answer 3

When installing a trailer wiring harness such as #118409 on your 2005 Jeep Wrangler the connection on the passenger's side of the vehicle is a little harder to get to. Instead of reach in from underneath to find it like on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...