Chart With Error Codes Explained for the Prodigy P2 90885

Question

Question:

Would like to get a list of error codes for Prodigy 90185. Links to various sites dont seem to work. Getting dashes in display and dont know what that means. Thanks

asked by: John D

0

Expert Reply:

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part # 90885 that you referenced.

I am not sure what you mean by dashes on the display so hopefully the chart helps you.

Feel free to email back with pictures of the display if you need more help.

expert reply by: Jameson C

0

click to enlarge

Jim

7/31/2020

THE CONTROLLER HAS LOST ALL BRAKE ADJUSTMENT AND LOCKS UP WHEN BRAKES ARE APPLIED

Reply

Chris R.

8/10/2020

It honestly sounds like there may be an internal issue with the brake controller that requires a full replacement. I would start though by simply unplugging the controller from power, letting it sit for a bit, and then hooking it back up. Hopefully this will reset the unit and get it back to working like normal.

Reply

Jim

8/10/2020

@ChrisR found the issue it was a miss wired trailer lights on trailer

Reply

Answer 1

The first error code, SH, you are seeing on the Prodigy Brake Controller (instructions linked below) means the brake wire sees a short circuit during idle condition. The second code, OL, indicates an overload condition during operation. For the first…

view full answer...

Answer 2

The ER code on a Reese brake controller typically indicates an internal problem that can't be fixed and requires replacing the controller. Since yours is still working normal I'd say that you are probably on borrowed time with it and will…

view full answer...

Answer 3

The Prodigy P3 trailer brake controller uses a 4-wire hookup. The white wire is to be grounded to the battery negative terminal; the black power wire connects to the battery hot terminal through a circuit breaker; the red wire takes in the brake…

view full answer...

Answer 4

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 5

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 6

My technical contact at Tekonsha informed me that an OC error code is typically displayed on a Hayes manufactured product. The error OC translates to open circuit, which indicates that there is not a proper connection to the trailer brakes. This is…

view full answer...

Answer 7

If the bevel gears/gearbox for the dual-motor landing gear on your 2011 Keystone Laredo 266RL 5th wheel were badly worn or damaged you would most likely be able to hear it. These conditions typically cause a good bit of noise as the jacks try to…

view full answer...

Answer 8

When it comes to installing The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 pounds #BWRVK3300 on your 2019 Ford F-250 Super Duty The Replacement Head Assembly for B&W Companion 5th Wheel Trailer…

view full answer...

Answer 9

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 (RVK3500) is the complete 5th wheel hitch that will mount to an existing B&W Turnoverball Gooseneck Hitch socket in the truck bed. The part #BWRVB3500 (RVB3500) that you also referenced is…

view full answer...

Answer 10

The head of your B and W Companion hitch part #BWRVK3500 is adjustable front to back which allows a few different options. The best location is the forward-most position you can use that allows you enough clearance to make tight turns. Since you have…

view full answer...

Answer 11

The big advantage for the Tekonsha Prodigy P3 Trailer Brake Controller #90195 is going to be its adjustability. With the Ford integrated controller on your 2017 Ford F-150 you only have a gain adjustment. The P3 has a similar gain adjustment but…

view full answer...

Answer 12

On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…

view full answer...

Chart With Error Codes Explained for the Prodigy P2 90885

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching