How to Identify Replacement Trailer Bearings
Question:
I am looking for new bearings for a 2008 Dutchment T@DA. It has the Al-Ko U35 FC 67.75/49.75/1416mm 28mm/OUT/OB SM 10U UL FE 545E P/N: 1791593
asked by: Yanni
Expert Reply:
The best way to identify replacement trailer bearings is to pull one of the hubs and remove the existing bearings. This should allow you to find the part numbers stamped into the bearing housing. The linked photo shows the typical appearance of bearing numbers. If you cannot find part numbers you'll need to measure bearing inner and outer diameters to the nearest thousandth, such as 1.234-inches. You can use a caliper like # PTW80157.
With those part numbers in hand you can search our site for replacement bearings. I checked the part number you provided, 1791593, but I could not cross-reference this to any hub or bearing.
You can use the linked page to view all of our trailer bearings, races and bearing kits. The linked article on replacing bearings may also be of interest to you.
If you need a bearing packer we offer the Powerbuilt Deluxe Bearing Packer # ALL647646 that can be used along with a grease gun such as # PTW54290 along with bearing grease # L11465.
Products Referenced in This Question
Powerbuilt Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- Powerbuilt
more information >
LubriPlate Poly HP-2 Wheel Bearing Grease for Disc and Drum Brake Applications - 14-oz Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 14 oz
- LubriMatic
more information >
Heavy Duty Grease Gun - Lever Action - Aluminum
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 4500 psi
- 14 oz
- Performance Tool
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Suspension Bushing - Nylon
- Article: Most Popular Wheel Bearings
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Search Results: leaf spring bushing
- Search Results: leaf spring
- Search Results: leaf spring bushings
- Shop: Two Piece Nylon Bushing - Qty 4
- Shop: Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Search Results: tandem axle
- Search Results: tandem axle hanger kit
- Search Results: tandem axle suspension
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: Seal With Dimensions to Replace 171255UC
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Shop: Fifth Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Gooseneck Hitch
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: Suspension Enhancement